湖南科技大学学报(自然科学版)
湖南科技大學學報(自然科學版)
호남과기대학학보(자연과학판)
JOURNAL OF HUNAN UNIVERSITY OF SCIENCE & TECHNOLOGY(NATURAL SCIENCE EDITION)
2012年
2期
32-36
,共5页
李万军%刘德顺%金永平%刘婷
李萬軍%劉德順%金永平%劉婷
리만군%류덕순%금영평%류정
离心泵%吸水室%锥角%数值模拟
離心泵%吸水室%錐角%數值模擬
리심빙%흡수실%추각%수치모의
以立式离心泵渐缩式直锥形吸水室为研究对象,采用数值模拟方法,应用FLUENT软件,基于N-S方程,采用重整化k-ε模型、SIMPLE算法和MRF模型对设计工况下的9组离心泵模型进行了仿真分析,预测了泵的性能,研究了渐缩式直锥形吸水室内部的流动状况及其锥角对泵性能的影响.结果表明,靠近吸水室内壁面区域和靠近叶轮进口区域流场较紊乱且随吸水室锥角变大逐步加剧;吸水室中心线附近区域沿水流方向流速变化率不大,靠近内壁面区域沿水流方向流速变化率较大且随吸水室锥角变大流速变化率逐渐增加;泵的轴功率随着吸水室锥角的增大而变大,扬程和效率随着吸水室锥角的变大略有下降.通过仿真可以为直锥形吸水室的设计提供一定的理论参考.
以立式離心泵漸縮式直錐形吸水室為研究對象,採用數值模擬方法,應用FLUENT軟件,基于N-S方程,採用重整化k-ε模型、SIMPLE算法和MRF模型對設計工況下的9組離心泵模型進行瞭倣真分析,預測瞭泵的性能,研究瞭漸縮式直錐形吸水室內部的流動狀況及其錐角對泵性能的影響.結果錶明,靠近吸水室內壁麵區域和靠近葉輪進口區域流場較紊亂且隨吸水室錐角變大逐步加劇;吸水室中心線附近區域沿水流方嚮流速變化率不大,靠近內壁麵區域沿水流方嚮流速變化率較大且隨吸水室錐角變大流速變化率逐漸增加;泵的軸功率隨著吸水室錐角的增大而變大,颺程和效率隨著吸水室錐角的變大略有下降.通過倣真可以為直錐形吸水室的設計提供一定的理論參攷.
이입식리심빙점축식직추형흡수실위연구대상,채용수치모의방법,응용FLUENT연건,기우N-S방정,채용중정화k-ε모형、SIMPLE산법화MRF모형대설계공황하적9조리심빙모형진행료방진분석,예측료빙적성능,연구료점축식직추형흡수실내부적류동상황급기추각대빙성능적영향.결과표명,고근흡수실내벽면구역화고근협륜진구구역류장교문란차수흡수실추각변대축보가극;흡수실중심선부근구역연수류방향류속변화솔불대,고근내벽면구역연수류방향류속변화솔교대차수흡수실추각변대류속변화솔축점증가;빙적축공솔수착흡수실추각적증대이변대,양정화효솔수착흡수실추각적변대략유하강.통과방진가이위직추형흡수실적설계제공일정적이론삼고.