CAJ | 학술논문

采用扫描电镜、化学分析法和电化学方法，详细研究了阴极电流密度、镀液温度、镀液中Mo S2微粒浓度等工艺条件对Ni-MoS2自润滑复合镀层硬度及摩擦学性能的影响，获得了制备复合镀层的最佳工艺参数为：MoS2 10 g/L，分散剂0.1 mg/g MoS2，表面活性剂C 10 -6 L/L，pH值4.8，温度55 ℃，Dk=1 A/dm\+2，空气搅拌。按此工艺获得的复合镀层具有显著的耐磨减摩功效。
채용소묘전경、화학분석법화전화학방법，상세연구료음겁전류밀도、도액온도、도액중Mo S2미립농도등공예조건대Ni-MoS2자윤활복합도층경도급마찰학성능적영향，획득료제비복합도층적최가공예삼수위：MoS2 10 g/L，분산제0.1 mg/g MoS2，표면활성제C 10 -6 L/L，pH치4.8，온도55 ℃，Dk=1 A/dm\+2，공기교반。안차공예획득적복합도층구유현저적내마감마공효。
The effects of cathodic current density temperature and MoS2 contents in bath on the hardnss and tribological characteristics of NiMoS2 selflubricating composite coating were investigated by SEM and elec-trochemical methods. The optimum technological parameters were MoS2 10 g/L dispering agent 0.1 mg/g MoS2 surfactant 10-6 L/L pH value 4～8 Dk=1 A/dm2 55 ℃ air stirring.