等离子体科学和技术(英文版)
等離子體科學和技術(英文版)
등리자체과학화기술(영문판)
PLASMA SCIENCE & TECHNOLOGY
2002年
5期
1463-1468
,共6页
吴继红%张斧%许增裕%严建成
吳繼紅%張斧%許增裕%嚴建成
오계홍%장부%허증유%엄건성
fusion reactor%divertor-plate materials%thermal fatigue%divertor mock-up
Thermal fatigue property of the divertor plate is one of the key issues that governs the lifetime of the divertor plate. Taking tungsten as surface material, a small-mock-up divertor plate was made by hot isostatic press welding (HIP). A thermal cycling experiment for divertor mock-up was carried out in the vacuum, where a high-heat-flux electronic gun was used as the thermal source. A cyclic heat flux of 9 MW/m2 was loaded onto the mock-up, a heating duration of 20 s was selected, the cooling water flow rate was 80 ml/s. After 1000 cycles, the surface and the W/Cu joint of the mock-up did not show any damage. The SEM was used to analyze the microstructure of the welding joint, where no cracks were found also.
