表面技术
錶麵技術
표면기술
SURFACE TECHNOLOGY
2006年
1期
17-19,39
,共4页
A3钢%憎水膜%耐蚀性
A3鋼%憎水膜%耐蝕性
A3강%증수막%내식성
研究一种以市售聚硅氧烷乳液为基料,辅以催化剂金属盐和水溶性缓蚀剂制备出可对预处理过的A3钢试样进行憎水处理的水基有机硅憎水剂.考察了浸渍时间、不同热处理温度及热处理时间等处理条件对憎水膜层憎水性的影响并优化了工艺.实验表明,用所述憎水剂处理的金属磷化试样和植酸处理试样的憎水角分别为130°和100°左右,较大幅度提高了零件的耐腐蚀性,为水基憎水剂取代溶剂基憎水剂的研究奠定了实验基础.
研究一種以市售聚硅氧烷乳液為基料,輔以催化劑金屬鹽和水溶性緩蝕劑製備齣可對預處理過的A3鋼試樣進行憎水處理的水基有機硅憎水劑.攷察瞭浸漬時間、不同熱處理溫度及熱處理時間等處理條件對憎水膜層憎水性的影響併優化瞭工藝.實驗錶明,用所述憎水劑處理的金屬燐化試樣和植痠處理試樣的憎水角分彆為130°和100°左右,較大幅度提高瞭零件的耐腐蝕性,為水基憎水劑取代溶劑基憎水劑的研究奠定瞭實驗基礎.
연구일충이시수취규양완유액위기료,보이최화제금속염화수용성완식제제비출가대예처리과적A3강시양진행증수처리적수기유궤규증수제.고찰료침지시간、불동열처리온도급열처리시간등처리조건대증수막층증수성적영향병우화료공예.실험표명,용소술증수제처리적금속린화시양화식산처리시양적증수각분별위130°화100°좌우,교대폭도제고료령건적내부식성,위수기증수제취대용제기증수제적연구전정료실험기출.