CAJ | 학술논문

通过研究不同工件底孔直径下冷挤压内螺纹的振动信号，并对其在时域、频域及时频域上的分析，研究了在不同工件底孔直径下，冷挤压内螺纹振动信号的变化规律，进而从振动信号方面解释不同工件底孔直径对冷挤压内螺纹的影响。研究结果表明，随着工件底孔直径的增大，振动信号的振动幅值相继减小，振动信号的频率从高频向低频移动，振动信号能量主要分布在625～1250Hz范围，且振动信号的总能量不断减小。
통과연구불동공건저공직경하랭제압내라문적진동신호，병대기재시역、빈역급시빈역상적분석，연구료재불동공건저공직경하，랭제압내라문진동신호적변화규률，진이종진동신호방면해석불동공건저공직경대랭제압내라문적영향。연구결과표명，수착공건저공직경적증대，진동신호적진동폭치상계감소，진동신호적빈솔종고빈향저빈이동，진동신호능량주요분포재625～1250Hz범위，차진동신호적총능량불단감소。
The vibration signal of cold extrusion of internal thread under different workpiece hole diameters was re searched. And it was analyzed on time domain, frequency domain and timerequency domain, so as to obtain its trend. The results show that, as workpiece hole diameter increases, the vibration amplitude reduces, and the frequency of vibration signal moves from high frequency to low frequency. The energy of vibration signal is mainly in the range of 625-1 250 Hz, and the total energy of the vibration signal decreases.