重庆理工大学学报(自然科学版)
重慶理工大學學報(自然科學版)
중경리공대학학보(자연과학판)
JOURNAL OF CHONGQING INSTITUTE OF TECHNOLOGY
2011年
5期
56-60,69
,共6页
热轧带钢%自动厚度控制%液压辊缝控制%补偿
熱軋帶鋼%自動厚度控製%液壓輥縫控製%補償
열알대강%자동후도공제%액압곤봉공제%보상
为了提高热轧带钢厚度精度,控制板形,提高带材合格率,研究了热轧带钢自动厚度控制系统的辊缝控制和AGC控制,以及为消除系统内扰动的各种补偿控制.这些自动控制技术的应用结果表明:对于厚度为1.2~4.0 mm的钢板,厚度偏差小于25μm;对于厚度为4.0~10.0 mm的钢板,厚度偏差小于35μm.
為瞭提高熱軋帶鋼厚度精度,控製闆形,提高帶材閤格率,研究瞭熱軋帶鋼自動厚度控製繫統的輥縫控製和AGC控製,以及為消除繫統內擾動的各種補償控製.這些自動控製技術的應用結果錶明:對于厚度為1.2~4.0 mm的鋼闆,厚度偏差小于25μm;對于厚度為4.0~10.0 mm的鋼闆,厚度偏差小于35μm.
위료제고열알대강후도정도,공제판형,제고대재합격솔,연구료열알대강자동후도공제계통적곤봉공제화AGC공제,이급위소제계통내우동적각충보상공제.저사자동공제기술적응용결과표명:대우후도위1.2~4.0 mm적강판,후도편차소우25μm;대우후도위4.0~10.0 mm적강판,후도편차소우35μm.