复合材料学报
複閤材料學報
복합재료학보
ACTA MATERIAE COMPOSITAE SINICA
2008年
4期
96-100
,共5页
徐任信%王钧%鲁学林%卢艳华
徐任信%王鈞%魯學林%盧豔華
서임신%왕균%로학림%로염화
Landau相变理论%导电复合材料%电导率%渗流阅值%PTC温度
Landau相變理論%導電複閤材料%電導率%滲流閱值%PTC溫度
Landau상변이론%도전복합재료%전도솔%삼류열치%PTC온도
为研究短切碳纤维含量和温度对导电复合材料渗流行为的影响,通过Landau相变理论导出了复合材料电导率与填料体积分数及温度的方程,并用该方程分析了短切碳纤维/乙烯基酯树脂复合材料的渗流和PTC行为.结果表明:复合材料的渗流阈值随温度升高而增加,PTC温度随碳纤维含量增加而上升.当温度由24.6℃上升到108.4℃时,其渗流阈值的理论值由1.06%增加到1.60%;当碳纤维体积分数由3.1%增加到4.6%时,其PTC温度的理论值由120℃上升到170℃.复合材料渗流阈值和PTC温度理论值与实验值符合得很好.
為研究短切碳纖維含量和溫度對導電複閤材料滲流行為的影響,通過Landau相變理論導齣瞭複閤材料電導率與填料體積分數及溫度的方程,併用該方程分析瞭短切碳纖維/乙烯基酯樹脂複閤材料的滲流和PTC行為.結果錶明:複閤材料的滲流閾值隨溫度升高而增加,PTC溫度隨碳纖維含量增加而上升.噹溫度由24.6℃上升到108.4℃時,其滲流閾值的理論值由1.06%增加到1.60%;噹碳纖維體積分數由3.1%增加到4.6%時,其PTC溫度的理論值由120℃上升到170℃.複閤材料滲流閾值和PTC溫度理論值與實驗值符閤得很好.
위연구단절탄섬유함량화온도대도전복합재료삼류행위적영향,통과Landau상변이론도출료복합재료전도솔여전료체적분수급온도적방정,병용해방정분석료단절탄섬유/을희기지수지복합재료적삼류화PTC행위.결과표명:복합재료적삼류역치수온도승고이증가,PTC온도수탄섬유함량증가이상승.당온도유24.6℃상승도108.4℃시,기삼류역치적이론치유1.06%증가도1.60%;당탄섬유체적분수유3.1%증가도4.6%시,기PTC온도적이론치유120℃상승도170℃.복합재료삼류역치화PTC온도이론치여실험치부합득흔호.