中国给水排水
中國給水排水
중국급수배수
CHINA WATER & WASTEWATER
2010年
5期
134-137
,共4页
艾恒雨%孙晓君%杜青林%董晶颢%阎险峰%燕红
艾恆雨%孫曉君%杜青林%董晶顥%閻險峰%燕紅
애항우%손효군%두청림%동정호%염험봉%연홍
絮凝%网格%折板%机械搅拌%排泥周期%污泥沉降性能
絮凝%網格%摺闆%機械攪拌%排泥週期%汙泥沉降性能
서응%망격%절판%궤계교반%배니주기%오니침강성능
flocculation%grid%folded plate%mechanical flocculation%sludge discharge period%sludge settleability
在不同的聚合氯化铝(PAC)投量下,考察了网格、折板和机械搅拌三种絮凝方式对沉淀池排泥周期和污泥静沉性能的影响.结果表明,当PAC投量<20 mg/L时,网格絮凝池中矾花的沉降性能最好,相应的沉淀池排泥周期也最长,为10 h;当PAC投量为25 mg/L时,三者的排泥周期均为8 h左右,排泥水初始含固率也基本相同,此时,与网格池和搅拌池相比,折板池的污泥静沉性能最好、上清液浊度最低、浓缩后的污泥体积最小,表明该池型更适于对排泥水进行再絮凝沉淀.
在不同的聚閤氯化鋁(PAC)投量下,攷察瞭網格、摺闆和機械攪拌三種絮凝方式對沉澱池排泥週期和汙泥靜沉性能的影響.結果錶明,噹PAC投量<20 mg/L時,網格絮凝池中礬花的沉降性能最好,相應的沉澱池排泥週期也最長,為10 h;噹PAC投量為25 mg/L時,三者的排泥週期均為8 h左右,排泥水初始含固率也基本相同,此時,與網格池和攪拌池相比,摺闆池的汙泥靜沉性能最好、上清液濁度最低、濃縮後的汙泥體積最小,錶明該池型更適于對排泥水進行再絮凝沉澱.
재불동적취합록화려(PAC)투량하,고찰료망격、절판화궤계교반삼충서응방식대침정지배니주기화오니정침성능적영향.결과표명,당PAC투량<20 mg/L시,망격서응지중반화적침강성능최호,상응적침정지배니주기야최장,위10 h;당PAC투량위25 mg/L시,삼자적배니주기균위8 h좌우,배니수초시함고솔야기본상동,차시,여망격지화교반지상비,절판지적오니정침성능최호、상청액탁도최저、농축후적오니체적최소,표명해지형경괄우대배니수진행재서응침정.
In order to investigate the effect of flocculation modes on sludge discharge period and sludge static settleability, three types of flocculation equipments including grids, folded plates and me-chanical flocculator were studied at different PAC dosages.The results show that grid-flocculation per-forms the best when PAC dosage is lower than 20 mg/L with a sludge discharge period of 10 h.When the PAC dosage is 25 mg/L, the sludge discharge periods of three types of flocculation equipments are all a-bout 8 h, and the initial solid contents are generally the same.Compared with grid-basin and mechanical flocculator, the sludge settleability in folded plates-basin is better, the turbidity of supernatant is lower, and the sludge volume after thickening is smaller.It can be concluded that folded plates-basin is more suitable for re-flocculation of the sludge water.