石油化工
石油化工
석유화공
PETROCHEMICAL TECHNOLOGY
2012年
4期
391-395
,共5页
程远见%姜红%陈日志%邢卫红%金万勤
程遠見%薑紅%陳日誌%邢衛紅%金萬勤
정원견%강홍%진일지%형위홍%금만근
纳米晶氧化铜催化剂%苯酚氧化%苯二酚
納米晶氧化銅催化劑%苯酚氧化%苯二酚
납미정양화동최화제%분분양화%분이분
采用沉淀法制备了纳米晶氧化铜催化剂,通过XRD、TEM及N2吸附-脱附法对纳米晶氧化铜催化剂的微观结构进行了表征.表征结果显示,制备的纳米晶氧化铜的平均粒径为8.5 nm,比表面积为56.2 m2/g.研究了纳米晶氧化铜催化氧化苯酚的性能,同时对反应条件进行了优化.实验结果表明,自制的纳米晶氧化铜催化剂具有优良的催化性能,反应条件(如催化剂用量、抗坏血酸用量、溶剂中醋酸含量及反应温度)对苯二酚收率有显著影响.在苯酚浓度1.28 mol/L、催化剂用量0.572mol/L、抗坏血酸用量0.796 mol/L、20%((φ))醋酸水溶液(50mL)为溶剂、氧气流量70-80 mL/min、反应温度308K的优化条件下反应90 min,苯二酚收率达14.90%.
採用沉澱法製備瞭納米晶氧化銅催化劑,通過XRD、TEM及N2吸附-脫附法對納米晶氧化銅催化劑的微觀結構進行瞭錶徵.錶徵結果顯示,製備的納米晶氧化銅的平均粒徑為8.5 nm,比錶麵積為56.2 m2/g.研究瞭納米晶氧化銅催化氧化苯酚的性能,同時對反應條件進行瞭優化.實驗結果錶明,自製的納米晶氧化銅催化劑具有優良的催化性能,反應條件(如催化劑用量、抗壞血痠用量、溶劑中醋痠含量及反應溫度)對苯二酚收率有顯著影響.在苯酚濃度1.28 mol/L、催化劑用量0.572mol/L、抗壞血痠用量0.796 mol/L、20%((φ))醋痠水溶液(50mL)為溶劑、氧氣流量70-80 mL/min、反應溫度308K的優化條件下反應90 min,苯二酚收率達14.90%.
채용침정법제비료납미정양화동최화제,통과XRD、TEM급N2흡부-탈부법대납미정양화동최화제적미관결구진행료표정.표정결과현시,제비적납미정양화동적평균립경위8.5 nm,비표면적위56.2 m2/g.연구료납미정양화동최화양화분분적성능,동시대반응조건진행료우화.실험결과표명,자제적납미정양화동최화제구유우량적최화성능,반응조건(여최화제용량、항배혈산용량、용제중작산함량급반응온도)대분이분수솔유현저영향.재분분농도1.28 mol/L、최화제용량0.572mol/L、항배혈산용량0.796 mol/L、20%((φ))작산수용액(50mL)위용제、양기류량70-80 mL/min、반응온도308K적우화조건하반응90 min,분이분수솔체14.90%.