电镀与涂饰
電鍍與塗飾
전도여도식
ELECTROPLATING & FINISHING
2011年
9期
60-62
,共3页
水性聚氨酯%碳纳米管%改性%紫外光固化%抗静电涂层
水性聚氨酯%碳納米管%改性%紫外光固化%抗靜電塗層
수성취안지%탄납미관%개성%자외광고화%항정전도층
以异佛尔酮二异氰酸酯(IPDI)、聚乙二醇(PEG400)、2,2-双羟甲基丙酸(DMPA)和甲基丙烯酸-2-羟乙酯(HEMA)为主要原料,合成光固化水性聚氨酯丙烯酸酯预聚体,以三乙醇胺中和后,原位引入经浓硝酸处理过的碳纳米管(CNTs),制备了光固化水性聚氨酯碳纳米管复合乳液(WPU/CNTs),加入光引发剂后交联固化得到聚氨酯复合膜.研究了复合涂膜的电学和力学性能,通过扫描电镜(SEM)对复合膜微观结构进行了分析.结果表明,碳纳米管均匀分散在聚氨酯膜中,当CNTs质量分数为0.6%时,复合涂膜的拉伸强度为15.54 MPa,断裂伸长率为31.27%,附着力0~1级,悬臂梁冲击强度10.37 kJ/m2.涂膜具有半导体性质,可用作抗静电材料.
以異彿爾酮二異氰痠酯(IPDI)、聚乙二醇(PEG400)、2,2-雙羥甲基丙痠(DMPA)和甲基丙烯痠-2-羥乙酯(HEMA)為主要原料,閤成光固化水性聚氨酯丙烯痠酯預聚體,以三乙醇胺中和後,原位引入經濃硝痠處理過的碳納米管(CNTs),製備瞭光固化水性聚氨酯碳納米管複閤乳液(WPU/CNTs),加入光引髮劑後交聯固化得到聚氨酯複閤膜.研究瞭複閤塗膜的電學和力學性能,通過掃描電鏡(SEM)對複閤膜微觀結構進行瞭分析.結果錶明,碳納米管均勻分散在聚氨酯膜中,噹CNTs質量分數為0.6%時,複閤塗膜的拉伸彊度為15.54 MPa,斷裂伸長率為31.27%,附著力0~1級,懸臂樑遲擊彊度10.37 kJ/m2.塗膜具有半導體性質,可用作抗靜電材料.
이이불이동이이청산지(IPDI)、취을이순(PEG400)、2,2-쌍간갑기병산(DMPA)화갑기병희산-2-간을지(HEMA)위주요원료,합성광고화수성취안지병희산지예취체,이삼을순알중화후,원위인입경농초산처리과적탄납미관(CNTs),제비료광고화수성취안지탄납미관복합유액(WPU/CNTs),가입광인발제후교련고화득도취안지복합막.연구료복합도막적전학화역학성능,통과소묘전경(SEM)대복합막미관결구진행료분석.결과표명,탄납미관균균분산재취안지막중,당CNTs질량분수위0.6%시,복합도막적랍신강도위15.54 MPa,단렬신장솔위31.27%,부착력0~1급,현비량충격강도10.37 kJ/m2.도막구유반도체성질,가용작항정전재료.