红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2011年
1期
79-82
,共4页
陈潇%杨建峰%马小龙%白瑜%何佶珂%何建伟
陳瀟%楊建峰%馬小龍%白瑜%何佶珂%何建偉
진소%양건봉%마소룡%백유%하길가%하건위
消热差%衍射光学元件%非球面%红外光学系统
消熱差%衍射光學元件%非毬麵%紅外光學繫統
소열차%연사광학원건%비구면%홍외광학계통
利用折/衍混合透镜实现了超宽温度范围内的光学被动式消热差设计,系统工作波段为8~12μm,全视场角为9.15°,焦距为100mm,相对孔径为1/1.5,总长为128mm,后工作距为10.5 mm.使用了锗和硒化锌两种材料,采用三片透镜,衍射面和偶次非球面的引入,不但能够消除热差,而且使得结构简单、轻量化,很好地提高了成像质量.设计结果表明:在-80~160℃温度范围内,空间频率为12.51p/mm处,各个温度下的MTF值均大于0.6,接近于衍射极限,成像质量良好,实现了消热差设计.该系统适用于像元尺寸为40μm,像元数为320×240的非制冷红外焦平面阵列探测器.
利用摺/衍混閤透鏡實現瞭超寬溫度範圍內的光學被動式消熱差設計,繫統工作波段為8~12μm,全視場角為9.15°,焦距為100mm,相對孔徑為1/1.5,總長為128mm,後工作距為10.5 mm.使用瞭鍺和硒化鋅兩種材料,採用三片透鏡,衍射麵和偶次非毬麵的引入,不但能夠消除熱差,而且使得結構簡單、輕量化,很好地提高瞭成像質量.設計結果錶明:在-80~160℃溫度範圍內,空間頻率為12.51p/mm處,各箇溫度下的MTF值均大于0.6,接近于衍射極限,成像質量良好,實現瞭消熱差設計.該繫統適用于像元呎吋為40μm,像元數為320×240的非製冷紅外焦平麵陣列探測器.
이용절/연혼합투경실현료초관온도범위내적광학피동식소열차설계,계통공작파단위8~12μm,전시장각위9.15°,초거위100mm,상대공경위1/1.5,총장위128mm,후공작거위10.5 mm.사용료타화서화자량충재료,채용삼편투경,연사면화우차비구면적인입,불단능구소제열차,이차사득결구간단、경양화,흔호지제고료성상질량.설계결과표명:재-80~160℃온도범위내,공간빈솔위12.51p/mm처,각개온도하적MTF치균대우0.6,접근우연사겁한,성상질량량호,실현료소열차설계.해계통괄용우상원척촌위40μm,상원수위320×240적비제랭홍외초평면진렬탐측기.