山东科技大学学报:自然科学版
山東科技大學學報:自然科學版
산동과기대학학보:자연과학판
Journal of Shandong Univ of Sci and Technol: Nat Sci
2011年
5期
96-102
,共7页
王印军%任勇生%孙丙磊%宋玉壁
王印軍%任勇生%孫丙磊%宋玉壁
왕인군%임용생%손병뢰%송옥벽
垂直轴风力机塔架%静力学分析%动力学分析%地震谱响应分析%结构优化
垂直軸風力機塔架%靜力學分析%動力學分析%地震譜響應分析%結構優化
수직축풍력궤탑가%정역학분석%동역학분석%지진보향응분석%결구우화
tower frame of vertical axial fan%statics analysis%dynamics analysis,seismic response spectrum analysisstructural optimization
基于ANSYS对大型垂直轴风力机塔架进行静力学分析、动力学分析及结构优化。首先,根据风力机的功率确定塔架的大体尺寸;然后,对塔架进行静力分析,并对塔架承受最大载荷时的最大应变进行强度校核;对塔架的动力学分析包括有预应力的模态分析和地震谱响应分析。ANSYS优化主要是通过改变塔架的厚度提高其固有频率,避免因塔架在发电机的激励下共振而产生的破坏。对塔架的力学分析能够在满足力学性能的前提下使塔架的质量最轻,降低塔架的制造成本。
基于ANSYS對大型垂直軸風力機塔架進行靜力學分析、動力學分析及結構優化。首先,根據風力機的功率確定塔架的大體呎吋;然後,對塔架進行靜力分析,併對塔架承受最大載荷時的最大應變進行彊度校覈;對塔架的動力學分析包括有預應力的模態分析和地震譜響應分析。ANSYS優化主要是通過改變塔架的厚度提高其固有頻率,避免因塔架在髮電機的激勵下共振而產生的破壞。對塔架的力學分析能夠在滿足力學性能的前提下使塔架的質量最輕,降低塔架的製造成本。
기우ANSYS대대형수직축풍력궤탑가진행정역학분석、동역학분석급결구우화。수선,근거풍력궤적공솔학정탑가적대체척촌;연후,대탑가진행정력분석,병대탑가승수최대재하시적최대응변진행강도교핵;대탑가적동역학분석포괄유예응력적모태분석화지진보향응분석。ANSYS우화주요시통과개변탑가적후도제고기고유빈솔,피면인탑가재발전궤적격려하공진이산생적파배。대탑가적역학분석능구재만족역학성능적전제하사탑가적질량최경,강저탑가적제조성본。
The statics analysis,dynamics analysis and structural optimization of tower frame of large vertical axial fan were presented based on ANSYS. First of all,the size of tower frame was determined according to the power of fan. Then,statics analysis for the tower frame was carried out. And, the strength check for the maximum strain of the tower frame under the maximum load was discussed. Dynamics analysis including prestressed modal analysis, seismic response spectrum analysis was performed. The optimization based on ANSYS was obtained by changing the thick- ness of the tower frame to increase the inherent frequency so as to avoid the damage of tower frame induced by the resonance of generator excitation. The mechanical analysis of the tower frame can ensure the lightest weight of the tower frame under the premise of mechanical properties and reducing the manufacturing cost of tower frame.