CAJ | 학술논문

在介绍以玻璃铜为基体的工艺品经表面预处理后进行酸性光亮镀铜及做旧着色处理的工艺流程、工艺配方及工艺条件的基础上，将传统的非金属电镀工艺流程中的敏化-活化-化学镀铜工序改为表面金属化后化学镀银的工序。结果表明：选用本工艺流程制作的镀件导电性好，光亮平整，其镀层与基体结合力强，表面色泽均匀、金属质感好，仿古逼真。并且成本低，操作简便。
재개소이파리동위기체적공예품경표면예처리후진행산성광량도동급주구착색처리적공예류정、공예배방급공예조건적기출상，장전통적비금속전도공예류정중적민화-활화-화학도동공서개위표면금속화후화학도은적공서。결과표명：선용본공예류정제작적도건도전성호，광량평정，기도층여기체결합력강，표면색택균균、금속질감호，방고핍진。병차성본저，조작간편。
This article first introduces the technological process, formulation and conditions of acidic bright copper plating and coloring treatment for the pretreated handicraft with FRP matrix. Then it demonstrates that the procedure of sensitization, activation and chemical copper plating in conventional nomnetallie electroplating technique can be changed into the one of electroless silver plating after surface metallization. The result shows that the plating pieces made by this technology have the properties of high electric conductivity, bright and uniform structure, greater adhesive strength with substrate, smooth surface and good quality with fine metallic sense, vivid imitation, low cost and easy operation.