大连理工大学学报
大連理工大學學報
대련리공대학학보
JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY
2011年
z1期
35-38
,共4页
郭国万%杨冰冰%刘威%赵小敏%张忠飞%李淑君
郭國萬%楊冰冰%劉威%趙小敏%張忠飛%李淑君
곽국만%양빙빙%류위%조소민%장충비%리숙군
酶解木质素%木陶瓷%得率%硬度%微观形态
酶解木質素%木陶瓷%得率%硬度%微觀形態
매해목질소%목도자%득솔%경도%미관형태
以酶解木质素为原料,经改性后与木质素混合、干燥、模压成型、高温烧结,成功制备了酶解木质素陶瓷,并分析了其产品得率、表面硬度、孔隙结构以及微观形态.原料木质素含有大量酚类结构,与酚醛树脂接近,更适于制备木陶瓷,产品质量、直径、厚度得率与酚醛树脂处理物料制备的木陶瓷接近.木质素改性前后的PY-GC-MS分析表明,木质亲热解中释放较多的低分子酚类物质,改性后的酶解木质素热解中释放的低分子酚类物质进一步增加,这些酚可循环用于木陶瓷制备.当改性木质素用量为20%时,表面硬度比空白提高近30%.SEM分析表明,经改性木质素处理制备的木陶瓷比酚醛树脂处理物料制备的木陶瓷样品表面光滑,并存在大量较均匀的孔隙结构.孔隙结构分析表明,浸渍处理使木陶瓷样品孔隙度下降,而酚醛树脂的这种作用明显强于改性木质紊.
以酶解木質素為原料,經改性後與木質素混閤、榦燥、模壓成型、高溫燒結,成功製備瞭酶解木質素陶瓷,併分析瞭其產品得率、錶麵硬度、孔隙結構以及微觀形態.原料木質素含有大量酚類結構,與酚醛樹脂接近,更適于製備木陶瓷,產品質量、直徑、厚度得率與酚醛樹脂處理物料製備的木陶瓷接近.木質素改性前後的PY-GC-MS分析錶明,木質親熱解中釋放較多的低分子酚類物質,改性後的酶解木質素熱解中釋放的低分子酚類物質進一步增加,這些酚可循環用于木陶瓷製備.噹改性木質素用量為20%時,錶麵硬度比空白提高近30%.SEM分析錶明,經改性木質素處理製備的木陶瓷比酚醛樹脂處理物料製備的木陶瓷樣品錶麵光滑,併存在大量較均勻的孔隙結構.孔隙結構分析錶明,浸漬處理使木陶瓷樣品孔隙度下降,而酚醛樹脂的這種作用明顯彊于改性木質紊.
이매해목질소위원료,경개성후여목질소혼합、간조、모압성형、고온소결,성공제비료매해목질소도자,병분석료기산품득솔、표면경도、공극결구이급미관형태.원료목질소함유대량분류결구,여분철수지접근,경괄우제비목도자,산품질량、직경、후도득솔여분철수지처리물료제비적목도자접근.목질소개성전후적PY-GC-MS분석표명,목질친열해중석방교다적저분자분류물질,개성후적매해목질소열해중석방적저분자분류물질진일보증가,저사분가순배용우목도자제비.당개성목질소용량위20%시,표면경도비공백제고근30%.SEM분석표명,경개성목질소처리제비적목도자비분철수지처리물료제비적목도자양품표면광활,병존재대량교균균적공극결구.공극결구분석표명,침지처리사목도자양품공극도하강,이분철수지적저충작용명현강우개성목질문.