功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2010年
10期
1757-1760,1764
,共5页
付传起%孙俊才%王宙%于驰
付傳起%孫俊纔%王宙%于馳
부전기%손준재%왕주%우치
石墨/铜铁基自润滑复合材料%感应加热烧结%摩擦系数%磨损率
石墨/銅鐵基自潤滑複閤材料%感應加熱燒結%摩抆繫數%磨損率
석묵/동철기자윤활복합재료%감응가열소결%마찰계수%마손솔
通过基体合金化和添加不同含量的石墨,采用感应加热烧结的方法制备了石墨/铜铁基高温自润滑复合材料,在力学性能试验机和MRH-3摩擦磨损试验机上考察了复合材料从室温~500℃温度条件下的力学和摩擦磨损性能,利用扫描电镜观察分析了磨损表面形貌,进而探讨了摩擦磨损机理.结果表明,复合材料的力学和摩擦磨损性能与感应加热频率和石墨含量有关;在室温条件下,随着石墨含量的升高复合材料的力学性能变差而减磨自润滑效果变好,在室温~500℃条件下,选用合适的感应加热频率和石墨的含量可以使石墨/铜铁基自润滑材料保持良好的耐磨性;而复合材料的磨损机制由粘着磨损变为犁沟磨损.
通過基體閤金化和添加不同含量的石墨,採用感應加熱燒結的方法製備瞭石墨/銅鐵基高溫自潤滑複閤材料,在力學性能試驗機和MRH-3摩抆磨損試驗機上攷察瞭複閤材料從室溫~500℃溫度條件下的力學和摩抆磨損性能,利用掃描電鏡觀察分析瞭磨損錶麵形貌,進而探討瞭摩抆磨損機理.結果錶明,複閤材料的力學和摩抆磨損性能與感應加熱頻率和石墨含量有關;在室溫條件下,隨著石墨含量的升高複閤材料的力學性能變差而減磨自潤滑效果變好,在室溫~500℃條件下,選用閤適的感應加熱頻率和石墨的含量可以使石墨/銅鐵基自潤滑材料保持良好的耐磨性;而複閤材料的磨損機製由粘著磨損變為犛溝磨損.
통과기체합금화화첨가불동함량적석묵,채용감응가열소결적방법제비료석묵/동철기고온자윤활복합재료,재역학성능시험궤화MRH-3마찰마손시험궤상고찰료복합재료종실온~500℃온도조건하적역학화마찰마손성능,이용소묘전경관찰분석료마손표면형모,진이탐토료마찰마손궤리.결과표명,복합재료적역학화마찰마손성능여감응가열빈솔화석묵함량유관;재실온조건하,수착석묵함량적승고복합재료적역학성능변차이감마자윤활효과변호,재실온~500℃조건하,선용합괄적감응가열빈솔화석묵적함량가이사석묵/동철기자윤활재료보지량호적내마성;이복합재료적마손궤제유점착마손변위리구마손.