高校化学工程学报
高校化學工程學報
고교화학공정학보
JOURNAL OF CHEMICAL ENGINEERING OF CHINESE UNIVERSITIES
2005年
2期
213-217
,共5页
曾建国%王艳君%李江涛%曹同玉%袁才登
曾建國%王豔君%李江濤%曹同玉%袁纔登
증건국%왕염군%리강도%조동옥%원재등
乳液聚合%涂料%室温固化%胺基/环氧体系
乳液聚閤%塗料%室溫固化%胺基/環氧體繫
유액취합%도료%실온고화%알기/배양체계
用马来酸酐和乙二胺合成了含有双键的伯胺化合物(UPA),并用其与丙烯酸系单体进行乳液共聚合制备了双组分室温固化涂料的第一组分.研究了乳化剂种类和UPA用量对聚合稳定性的影响,结果表明,若采用p-壬基酚聚氧化乙烯醚硫酸钠为乳化剂,且UPA用量低于单体总量2.5%(wt)时,可以制得稳定的UPA/丙烯酸酯共聚物乳液.通过对乳液聚合物的红外光谱分析表明,UPA与丙烯酸酯发生了共聚反应.将乙二醇二缩水甘油醚乳化形成水乳液,作为水乳型涂料的第二组分.将两种乳液复合后在室温下干燥成膜,通过对聚合物涂膜的DSC及力学性能的测试表明,双组分体系在成膜过程中发生了交联反应,而未加环氧化合物的单组分聚合物乳液成膜时则不发生交联.研究了不同UPA含量对涂膜拉伸强度的影响,结果表明,在适量UPA用量时可获得最高的涂膜拉伸强度.
用馬來痠酐和乙二胺閤成瞭含有雙鍵的伯胺化閤物(UPA),併用其與丙烯痠繫單體進行乳液共聚閤製備瞭雙組分室溫固化塗料的第一組分.研究瞭乳化劑種類和UPA用量對聚閤穩定性的影響,結果錶明,若採用p-壬基酚聚氧化乙烯醚硫痠鈉為乳化劑,且UPA用量低于單體總量2.5%(wt)時,可以製得穩定的UPA/丙烯痠酯共聚物乳液.通過對乳液聚閤物的紅外光譜分析錶明,UPA與丙烯痠酯髮生瞭共聚反應.將乙二醇二縮水甘油醚乳化形成水乳液,作為水乳型塗料的第二組分.將兩種乳液複閤後在室溫下榦燥成膜,通過對聚閤物塗膜的DSC及力學性能的測試錶明,雙組分體繫在成膜過程中髮生瞭交聯反應,而未加環氧化閤物的單組分聚閤物乳液成膜時則不髮生交聯.研究瞭不同UPA含量對塗膜拉伸彊度的影響,結果錶明,在適量UPA用量時可穫得最高的塗膜拉伸彊度.
용마래산항화을이알합성료함유쌍건적백알화합물(UPA),병용기여병희산계단체진행유액공취합제비료쌍조분실온고화도료적제일조분.연구료유화제충류화UPA용량대취합은정성적영향,결과표명,약채용p-임기분취양화을희미류산납위유화제,차UPA용량저우단체총량2.5%(wt)시,가이제득은정적UPA/병희산지공취물유액.통과대유액취합물적홍외광보분석표명,UPA여병희산지발생료공취반응.장을이순이축수감유미유화형성수유액,작위수유형도료적제이조분.장량충유액복합후재실온하간조성막,통과대취합물도막적DSC급역학성능적측시표명,쌍조분체계재성막과정중발생료교련반응,이미가배양화합물적단조분취합물유액성막시칙불발생교련.연구료불동UPA함량대도막랍신강도적영향,결과표명,재괄량UPA용량시가획득최고적도막랍신강도.