材料热处理学报
材料熱處理學報
재료열처이학보
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT
2006年
3期
108-111
,共4页
齐彦昌%马成勇%彭云%田志凌%华一新
齊彥昌%馬成勇%彭雲%田誌凌%華一新
제언창%마성용%팽운%전지릉%화일신
激光雕刻%非光滑表面%组织%硬度%耐磨性
激光彫刻%非光滑錶麵%組織%硬度%耐磨性
격광조각%비광활표면%조직%경도%내마성
采用激光雕刻技术在高速钢表面形成非光滑鳞片形态,利用扫描电镜、金相显微镜、X射线衍射仪分析了在激光雕刻快热、快冷的条件下的微观组织及其形成原因.结果表明,熔化区有极细胞状组织、极细枝状晶的形成;相变区晶粒得到细化,碳化物尺寸减小;热影响区碳化物聚集长大.利用显微硬度计、ML-100磨料磨损试验机考察非光滑表面的硬度及耐磨性.结果表明,硬度最高可达1120HV,抗磨粒磨损性能是未处理前的3.3倍.非光滑表面耐磨性提高的原因是细晶强化、弥散强化、固溶强化和仿生效应.
採用激光彫刻技術在高速鋼錶麵形成非光滑鱗片形態,利用掃描電鏡、金相顯微鏡、X射線衍射儀分析瞭在激光彫刻快熱、快冷的條件下的微觀組織及其形成原因.結果錶明,鎔化區有極細胞狀組織、極細枝狀晶的形成;相變區晶粒得到細化,碳化物呎吋減小;熱影響區碳化物聚集長大.利用顯微硬度計、ML-100磨料磨損試驗機攷察非光滑錶麵的硬度及耐磨性.結果錶明,硬度最高可達1120HV,抗磨粒磨損性能是未處理前的3.3倍.非光滑錶麵耐磨性提高的原因是細晶彊化、瀰散彊化、固溶彊化和倣生效應.
채용격광조각기술재고속강표면형성비광활린편형태,이용소묘전경、금상현미경、X사선연사의분석료재격광조각쾌열、쾌랭적조건하적미관조직급기형성원인.결과표명,용화구유겁세포상조직、겁세지상정적형성;상변구정립득도세화,탄화물척촌감소;열영향구탄화물취집장대.이용현미경도계、ML-100마료마손시험궤고찰비광활표면적경도급내마성.결과표명,경도최고가체1120HV,항마립마손성능시미처리전적3.3배.비광활표면내마성제고적원인시세정강화、미산강화、고용강화화방생효응.