热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2009年
11期
99-101,105
,共4页
尹玲%佟莹%艾百胜%权国政
尹玲%佟瑩%艾百勝%權國政
윤령%동형%애백성%권국정
温度%耦合%锻造%曲轴
溫度%耦閤%鍛造%麯軸
온도%우합%단조%곡축
阐述了塑性成形中热力耦合效应的数值分析方法,建立了曲轴锻造过程耦合计算的有限元模型,并进行了仿真分析.仿真结果表明.锻造成形结束时坯料局部温度有所上升,高达1210℃;锻件从锻造工序转移到切边工序后温度降低为1160℃;模具所受的最大热应力数值投有超过模具材料的高温屈服强度;摩擦系数对模具表层温度的影响态势中0.2和0.3是两个拐点.坯料及模具温度场的仿真预测为工艺及模具设计提供了依据.
闡述瞭塑性成形中熱力耦閤效應的數值分析方法,建立瞭麯軸鍛造過程耦閤計算的有限元模型,併進行瞭倣真分析.倣真結果錶明.鍛造成形結束時坯料跼部溫度有所上升,高達1210℃;鍛件從鍛造工序轉移到切邊工序後溫度降低為1160℃;模具所受的最大熱應力數值投有超過模具材料的高溫屈服彊度;摩抆繫數對模具錶層溫度的影響態勢中0.2和0.3是兩箇枴點.坯料及模具溫度場的倣真預測為工藝及模具設計提供瞭依據.
천술료소성성형중열력우합효응적수치분석방법,건립료곡축단조과정우합계산적유한원모형,병진행료방진분석.방진결과표명.단조성형결속시배료국부온도유소상승,고체1210℃;단건종단조공서전이도절변공서후온도강저위1160℃;모구소수적최대열응력수치투유초과모구재료적고온굴복강도;마찰계수대모구표층온도적영향태세중0.2화0.3시량개괴점.배료급모구온도장적방진예측위공예급모구설계제공료의거.