应用力学学报
應用力學學報
응용역학학보
CHINESE JOURNAL OF APPLIED MECHANICS
2004年
3期
1-8
,共8页
冠状动脉支架%圆柱薄壳结构弹塑性稳定性%脉管支架实验
冠狀動脈支架%圓柱薄殼結構彈塑性穩定性%脈管支架實驗
관상동맥지가%원주박각결구탄소성은정성%맥관지가실험
冠状动脉支架为圆柱形微型网状结构,直径1mm,厚度0.1mm,长度10~16mm.在经皮冠状动脉介入PCI治疗中由球囊充气撑开到直径为2.5~3.5mm的支架,在血管内承受血管壁回弹压力.为了保持血液流通支架必须保持其几何圆形.这是一个结构弹塑性稳定性问题.但是目前国际上对于支架的力学性能质量指标主要以强度性能评定而不涉及支架屈曲性能是不妥的.本文对于支架的强度和屈曲性能进行了全面的理论分析和实验研究,自行研制了智能式电子检测仪成功地对微型网状结构支架的强度和屈曲性能实现了实测实验研究.由于微型支架的离散型网状结构的特点,在实验中出现一些特殊的屈曲现象.本文研究结果对于支架的形状与性能设计的改进和力学性能质量标准规范的制订具有重要意义.
冠狀動脈支架為圓柱形微型網狀結構,直徑1mm,厚度0.1mm,長度10~16mm.在經皮冠狀動脈介入PCI治療中由毬囊充氣撐開到直徑為2.5~3.5mm的支架,在血管內承受血管壁迴彈壓力.為瞭保持血液流通支架必鬚保持其幾何圓形.這是一箇結構彈塑性穩定性問題.但是目前國際上對于支架的力學性能質量指標主要以彊度性能評定而不涉及支架屈麯性能是不妥的.本文對于支架的彊度和屈麯性能進行瞭全麵的理論分析和實驗研究,自行研製瞭智能式電子檢測儀成功地對微型網狀結構支架的彊度和屈麯性能實現瞭實測實驗研究.由于微型支架的離散型網狀結構的特點,在實驗中齣現一些特殊的屈麯現象.本文研究結果對于支架的形狀與性能設計的改進和力學性能質量標準規範的製訂具有重要意義.
관상동맥지가위원주형미형망상결구,직경1mm,후도0.1mm,장도10~16mm.재경피관상동맥개입PCI치료중유구낭충기탱개도직경위2.5~3.5mm적지가,재혈관내승수혈관벽회탄압력.위료보지혈액류통지가필수보지기궤하원형.저시일개결구탄소성은정성문제.단시목전국제상대우지가적역학성능질량지표주요이강도성능평정이불섭급지가굴곡성능시불타적.본문대우지가적강도화굴곡성능진행료전면적이론분석화실험연구,자행연제료지능식전자검측의성공지대미형망상결구지가적강도화굴곡성능실현료실측실험연구.유우미형지가적리산형망상결구적특점,재실험중출현일사특수적굴곡현상.본문연구결과대우지가적형상여성능설계적개진화역학성능질량표준규범적제정구유중요의의.