石油化工设备
石油化工設備
석유화공설비
PETRO-CHEMICAL EQUIPMENT
2009年
6期
64-66
,共3页
吴龙平%明斐卿%王成%王印泽
吳龍平%明斐卿%王成%王印澤
오룡평%명비경%왕성%왕인택
大型储罐%焊接材料%计算%比较
大型儲罐%銲接材料%計算%比較
대형저관%한접재료%계산%비교
介绍了大型储罐罐壁焊接接头的坡口形式和焊接材料的工程计算方法,采用工程计算方法和设计一般通用方法进行焊接材料计算,得出工程计算方法优于设计一般通用方法,纵焊缝设计参数宜选取钝边F=0 mm,坡口宽度W=16 mm,间隙G=4 mm.
介紹瞭大型儲罐罐壁銲接接頭的坡口形式和銲接材料的工程計算方法,採用工程計算方法和設計一般通用方法進行銲接材料計算,得齣工程計算方法優于設計一般通用方法,縱銲縫設計參數宜選取鈍邊F=0 mm,坡口寬度W=16 mm,間隙G=4 mm.
개소료대형저관관벽한접접두적파구형식화한접재료적공정계산방법,채용공정계산방법화설계일반통용방법진행한접재료계산,득출공정계산방법우우설계일반통용방법,종한봉설계삼수의선취둔변F=0 mm,파구관도W=16 mm,간극G=4 mm.