制造技术与机床
製造技術與機床
제조기술여궤상
MANUFACTURING TECHNOLOGY & MACHINE TOOL
2010年
1期
86-88
,共3页
端面孔数控专机%整体结构设计%主要部件设计
耑麵孔數控專機%整體結構設計%主要部件設計
단면공수공전궤%정체결구설계%주요부건설계
CNC Specialty Machine for Face-Drilling%Designing of the Whole Machine%Designing of the Principal Parts
主要介绍风力发电机主轴等大型轴类零件端面孔加工数控专机的研制过程.从确立专机的整体结构开始,根据整体结构设计,对机床5个重要构成部件:床身与导轨、动立柱、主轴与刀架、支承工件的定导轨、机床电气和数控控制系统进行研究和设计,介绍了机床的装配、调试过程,并通过完成实际工件的加工,达到了机床成本低、操作便捷的预期.
主要介紹風力髮電機主軸等大型軸類零件耑麵孔加工數控專機的研製過程.從確立專機的整體結構開始,根據整體結構設計,對機床5箇重要構成部件:床身與導軌、動立柱、主軸與刀架、支承工件的定導軌、機床電氣和數控控製繫統進行研究和設計,介紹瞭機床的裝配、調試過程,併通過完成實際工件的加工,達到瞭機床成本低、操作便捷的預期.
주요개소풍력발전궤주축등대형축류령건단면공가공수공전궤적연제과정.종학립전궤적정체결구개시,근거정체결구설계,대궤상5개중요구성부건:상신여도궤、동립주、주축여도가、지승공건적정도궤、궤상전기화수공공제계통진행연구화설계,개소료궤상적장배、조시과정,병통과완성실제공건적가공,체도료궤상성본저、조작편첩적예기.
This paper is mainly about the development of the CNC specialty machine for face-drilling on the large-scale shafts such as those of the wind-driven motor. It starts from the designing of the whole machine system. Then it comes to the studying and designing of the five principal parts of the machine. These parts are named as: the machine bed and bedway, moving chapiter, spindle and tool holder, fixed bedway for supporting the workpiece, electric circuit of the machine and NC systems. After that, this article introduced the assembly and the debugging process of the machine. Finally, by the manufacturing of the real workpieces, it is verified that the whole designing is suitable for the expectance that the machine is low cost and easy to operate.
