高等学校化学学报
高等學校化學學報
고등학교화학학보
CHEMICAL JOURNAL OF CHINESE UNIVERSITIES
2009年
11期
2119-2122
,共4页
付文升%李祖林%周小敏%张训燕%胡佳佳%牛玉玲
付文升%李祖林%週小敏%張訓燕%鬍佳佳%牛玉玲
부문승%리조림%주소민%장훈연%호가가%우옥령
阳极氧化铝膜%介孔硅%SBA-16的合成%表面活性剂
暘極氧化鋁膜%介孔硅%SBA-16的閤成%錶麵活性劑
양겁양화려막%개공규%SBA-16적합성%표면활성제
Anodic alumina membrane%Mesoporous silica%Synthesis of SBA-16%Surfactant
在阳极铝膜腔体内, 以三嵌段聚合物F127为表面活性剂合成出一维纳米介孔二氧化硅材料. 采用压力诱导合成方法能使纳米纤维沿着铝膜腔体有序生长排列, 并且只存在于铝膜的腔体内, 在铝膜表面没有残留. 在纳米纤维的两侧可以清楚地观察到具有六边形结构的孔道, 直径为12 nm. 考察了正硅酸乙酯的水解时间以及化合物的不同配比对材料形貌的影响.
在暘極鋁膜腔體內, 以三嵌段聚閤物F127為錶麵活性劑閤成齣一維納米介孔二氧化硅材料. 採用壓力誘導閤成方法能使納米纖維沿著鋁膜腔體有序生長排列, 併且隻存在于鋁膜的腔體內, 在鋁膜錶麵沒有殘留. 在納米纖維的兩側可以清楚地觀察到具有六邊形結構的孔道, 直徑為12 nm. 攷察瞭正硅痠乙酯的水解時間以及化閤物的不同配比對材料形貌的影響.
재양겁려막강체내, 이삼감단취합물F127위표면활성제합성출일유납미개공이양화규재료. 채용압력유도합성방법능사납미섬유연착려막강체유서생장배렬, 병차지존재우려막적강체내, 재려막표면몰유잔류. 재납미섬유적량측가이청초지관찰도구유륙변형결구적공도, 직경위12 nm. 고찰료정규산을지적수해시간이급화합물적불동배비대재료형모적영향.
One-dimensional nano-scaled mesoporous silica was synthesized within anodic alumina membrane pores surfactant by Pluronic F127. In contrast to soaking the AAM into the precursor solution way, we use pressure-induced infiltration approach and it has advantages that mesoporous silica hardly forms on the surface of AAM. Nano-fiber with highly uniform structure was arranged along anodic alumina cavity. The hexagonal pore structure is visible on both fiber edges with the diameters of the pores being about 12 nm. The effects of the ratio of chemical reagent and the reaction time on the mesostructure was also investigated. The resulting hybrid mesoporous membrane could be used for enzyme catalytic and nanofluidic systems.