特殊钢
特殊鋼
특수강
SPECIAL STEEL
2012年
1期
18-21
,共4页
徐光%操龙飞%补丛华%邹航
徐光%操龍飛%補叢華%鄒航
서광%조룡비%보총화%추항
超级贝氏体钢%组织%性能%现状%进展
超級貝氏體鋼%組織%性能%現狀%進展
초급패씨체강%조직%성능%현상%진전
超级贝氏体钢的基本合金元素为C-Mn-Si,通过300~500℃低温相变得到超细贝氏体、马氏体和残余奥氏体组织.为减小临界冷却速度、促进贝氏体转变,部分超级贝氏体钢中添加Cr、Ni、Mo等合金元素,并降低C、Mn含量以改善钢材的焊接性能.超级贝氏体钢具有超高强度和良好的塑性,其屈服和抗拉强度分别达~1 200MPa和1 600~1 700 MPa,总伸长率为~15%.新一代超级贝氏体钢的屈服强度可达1 300 MPa以上,抗拉强度超过1 700 MPa.
超級貝氏體鋼的基本閤金元素為C-Mn-Si,通過300~500℃低溫相變得到超細貝氏體、馬氏體和殘餘奧氏體組織.為減小臨界冷卻速度、促進貝氏體轉變,部分超級貝氏體鋼中添加Cr、Ni、Mo等閤金元素,併降低C、Mn含量以改善鋼材的銲接性能.超級貝氏體鋼具有超高彊度和良好的塑性,其屈服和抗拉彊度分彆達~1 200MPa和1 600~1 700 MPa,總伸長率為~15%.新一代超級貝氏體鋼的屈服彊度可達1 300 MPa以上,抗拉彊度超過1 700 MPa.
초급패씨체강적기본합금원소위C-Mn-Si,통과300~500℃저온상변득도초세패씨체、마씨체화잔여오씨체조직.위감소림계냉각속도、촉진패씨체전변,부분초급패씨체강중첨가Cr、Ni、Mo등합금원소,병강저C、Mn함량이개선강재적한접성능.초급패씨체강구유초고강도화량호적소성,기굴복화항랍강도분별체~1 200MPa화1 600~1 700 MPa,총신장솔위~15%.신일대초급패씨체강적굴복강도가체1 300 MPa이상,항랍강도초과1 700 MPa.