电子技术
電子技術
전자기술
ELECTRONIC TECHNOLOGY
2012年
1期
55-58
,共4页
二维位置敏感器件%遮光罩%窄带滤光片%信号处理%分辨率
二維位置敏感器件%遮光罩%窄帶濾光片%信號處理%分辨率
이유위치민감기건%차광조%착대려광편%신호처리%분변솔
一维PSD已无法满足教学和科研需求,研制二维PSD实验仪非常有意义.本仪器的设计分为结构测量部分与箱体部分,结构部分提供位移及测量装置,箱体部分提供信号处理及显示装置.结构设计上添加遮光罩和窄带滤光片,有效消除环境光的影响;箱体信号处理部分包括前级信号处理、增益补偿、调零电路、低通滤波,采用MCU减少差和运算电路噪声,给AD提供自行设计+5V基准电压(准确、稳定),并采用数字滤波技术等,测量的分辨率可达到10μm.
一維PSD已無法滿足教學和科研需求,研製二維PSD實驗儀非常有意義.本儀器的設計分為結構測量部分與箱體部分,結構部分提供位移及測量裝置,箱體部分提供信號處理及顯示裝置.結構設計上添加遮光罩和窄帶濾光片,有效消除環境光的影響;箱體信號處理部分包括前級信號處理、增益補償、調零電路、低通濾波,採用MCU減少差和運算電路譟聲,給AD提供自行設計+5V基準電壓(準確、穩定),併採用數字濾波技術等,測量的分辨率可達到10μm.
일유PSD이무법만족교학화과연수구,연제이유PSD실험의비상유의의.본의기적설계분위결구측량부분여상체부분,결구부분제공위이급측량장치,상체부분제공신호처리급현시장치.결구설계상첨가차광조화착대려광편,유효소제배경광적영향;상체신호처리부분포괄전급신호처리、증익보상、조령전로、저통려파,채용MCU감소차화운산전로조성,급AD제공자행설계+5V기준전압(준학、은정),병채용수자려파기술등,측량적분변솔가체도10μm.