石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2010年
1期
85-88
,共4页
胡之力%周亚清%陈秀丽%佟学军%孙景鹏
鬍之力%週亞清%陳秀麗%佟學軍%孫景鵬
호지력%주아청%진수려%동학군%손경붕
自产气剂%起泡助排剂%酸液转向%贾敏效应%助排%酸化
自產氣劑%起泡助排劑%痠液轉嚮%賈敏效應%助排%痠化
자산기제%기포조배제%산액전향%가민효응%조배%산화
self-productive gas agent%foaming cleanup additive%acid diversion%Jiamin action%cleanup%acid treating
针对低渗透油田重复酸化油井由于地层的非均质性和能量不足,造成酸液在地层中指进严重、返排速度慢、酸化效果差等现象,提出了自产气泡沫酸酸化技术.通过研制的自产气剂和DXQ-1高温起泡助排剂,实现自产气泡沫酸化.室内评价得出.自产气剂在酸液中或温度高于57℃时即可产生CO_2气体,发气量大.DXQ-1高温起泡助排剂初期起泡速度快,稳泡能力强,具有较高的表面活性和耐温性.自产气剂在井下生成泡沫,利用泡沫产生的贾敏效应,封堵地层中的大孔道,使后续酸液转向,提高了酸液与地层的作用效率;产生的气体和起泡剂具有高表面活性,大大提高了返排效果.在新民采油厂油井用该体系酸化.注入压力明显提高,返排速度快,增油效果好,施工工艺简单.
針對低滲透油田重複痠化油井由于地層的非均質性和能量不足,造成痠液在地層中指進嚴重、返排速度慢、痠化效果差等現象,提齣瞭自產氣泡沫痠痠化技術.通過研製的自產氣劑和DXQ-1高溫起泡助排劑,實現自產氣泡沫痠化.室內評價得齣.自產氣劑在痠液中或溫度高于57℃時即可產生CO_2氣體,髮氣量大.DXQ-1高溫起泡助排劑初期起泡速度快,穩泡能力彊,具有較高的錶麵活性和耐溫性.自產氣劑在井下生成泡沫,利用泡沫產生的賈敏效應,封堵地層中的大孔道,使後續痠液轉嚮,提高瞭痠液與地層的作用效率;產生的氣體和起泡劑具有高錶麵活性,大大提高瞭返排效果.在新民採油廠油井用該體繫痠化.註入壓力明顯提高,返排速度快,增油效果好,施工工藝簡單.
침대저삼투유전중복산화유정유우지층적비균질성화능량불족,조성산액재지층중지진엄중、반배속도만、산화효과차등현상,제출료자산기포말산산화기술.통과연제적자산기제화DXQ-1고온기포조배제,실현자산기포말산화.실내평개득출.자산기제재산액중혹온도고우57℃시즉가산생CO_2기체,발기량대.DXQ-1고온기포조배제초기기포속도쾌,은포능력강,구유교고적표면활성화내온성.자산기제재정하생성포말,이용포말산생적가민효응,봉도지층중적대공도,사후속산액전향,제고료산액여지층적작용효솔;산생적기체화기포제구유고표면활성,대대제고료반배효과.재신민채유엄유정용해체계산화.주입압력명현제고,반배속도쾌,증유효과호,시공공예간단.
Inhomageneity and energy scarcity of the formation in Oil-well treated repeatedly with acid in low permeability oil-field lead to serious fingering and poor backflow of acid liquid, resulting in poor acidizing impact. In order to solve the problem, self-pro-ductive gas agent and hot foaming cleanup additive called DXQ-1 are used for Foamed Acid by Self-productive Gas. Laboratory study indicates that self-productive gas agent can produce abundant carbon dioxide in the presence of acids or at high temperature (>57 ℃) . DXQ-1 with high surface activity and strong ability of anti- temperature can make acid liquid into foam quickly at the first period and enhance the stabilization of foam. The foam produced in formation can block big porous channel so that it change flowing diversion of following acid liquid because of"Jiamin action" and increase injection pressure, which increases the reaction efficiency between acid and formation. The gas and the foaming agent with high surface activity can decrease crude viscosity and is favorable to flowing back. It was found that the system had some characters as follows: improving injection pressure apparently; high flowing back speed; increasing oil production obviously; simple construction process, when it was applied in oil well of Xinmin oil production plant.