中国激光
中國激光
중국격광
CHINESE JOURNAL OF LASERS
2008年
11期
1756-1759
,共4页
牛伟%孙荣禄%雷贻文%郭喜华
牛偉%孫榮祿%雷貽文%郭喜華
우위%손영록%뢰이문%곽희화
laser technique%laser cladding%composites coating%microstructure%mechanism
Titanium matrix composite coatings were fabricated on Ti-6Al-4V substrate by laser cladding using powder mixtures of Ti-Cr3C2 and Ti+TiB, 2 respectively. The chemical compositions and mi-crostructures of the coatings were analyzed using scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). Microhardness was measured by a microhardness tester. The results showed that Cr3C2 particles were dissolved and deposited to form dendritic TiC in the upper section and spherical grain TiC in the bottom of Cr3C2+Ti coating. Most of TiB2 was dissolved in the molten pool by laser irradiation, then formed TiB with fine needles and coarse needles in the TiB2+Ti coat-ing. A few quasi-melted TiB2 particles with irregular shape at the bottom of the coating were observed. The average microhardnesses were approximately HV850--HV1000, HV800--HV1050 in the Cr3C2+Ti and TiB2+Ti coating, respectively, which were 2-3 times higher than that of Ti-6Al-4V substrate.