四川大学学报(工程科学版)
四川大學學報(工程科學版)
사천대학학보(공정과학판)
JOURNAL OF SICHUAN UNIVERSITY(ENGINEERING SCIENCE EDITION)
2008年
6期
75-79
,共5页
杜长城%王俊翔%陈杰富%李映辉
杜長城%王俊翔%陳傑富%李映輝
두장성%왕준상%진걸부%리영휘
锅炉管子%弯曲成形%回弹%有限元%数值模拟
鍋爐管子%彎麯成形%迴彈%有限元%數值模擬
과로관자%만곡성형%회탄%유한원%수치모의
建立了锅炉弯管缠绕式冷弯成形的有限元数值模拟模型,对管子绕弯成形工艺的预压变形补偿、缠绕弯曲成形和释放模具后的回弹三个阶段进行了系列全面的模拟计算.分析得到了管子弯曲后的应力及塑性应变分布特点,管子弯曲椭圆度和减薄率随着顶镦力和预压量等不同弯制参数的变化规律,管子壁厚对弯曲成形质量的影响,管子弯曲成形的回弹特性等.研究表明:弯曲应力主要集中在弯曲起弯段;对于一定的管子规格存在顶镦力的一个最优值,使得管子的弯曲质量最为理想;相对壁厚大的管子弯曲质量较好;管子回弹角约为0.05rad,相对壁厚对其无明显影响.
建立瞭鍋爐彎管纏繞式冷彎成形的有限元數值模擬模型,對管子繞彎成形工藝的預壓變形補償、纏繞彎麯成形和釋放模具後的迴彈三箇階段進行瞭繫列全麵的模擬計算.分析得到瞭管子彎麯後的應力及塑性應變分佈特點,管子彎麯橢圓度和減薄率隨著頂鐓力和預壓量等不同彎製參數的變化規律,管子壁厚對彎麯成形質量的影響,管子彎麯成形的迴彈特性等.研究錶明:彎麯應力主要集中在彎麯起彎段;對于一定的管子規格存在頂鐓力的一箇最優值,使得管子的彎麯質量最為理想;相對壁厚大的管子彎麯質量較好;管子迴彈角約為0.05rad,相對壁厚對其無明顯影響.
건립료과로만관전요식랭만성형적유한원수치모의모형,대관자요만성형공예적예압변형보상、전요만곡성형화석방모구후적회탄삼개계단진행료계렬전면적모의계산.분석득도료관자만곡후적응력급소성응변분포특점,관자만곡타원도화감박솔수착정대력화예압량등불동만제삼수적변화규률,관자벽후대만곡성형질량적영향,관자만곡성형적회탄특성등.연구표명:만곡응력주요집중재만곡기만단;대우일정적관자규격존재정대력적일개최우치,사득관자적만곡질량최위이상;상대벽후대적관자만곡질량교호;관자회탄각약위0.05rad,상대벽후대기무명현영향.