电焊机
電銲機
전한궤
ELECTRIC WELDING MACHINE
2007年
10期
54-58
,共5页
付炜亮%田松亚%吴冬春%甘正华
付煒亮%田鬆亞%吳鼕春%甘正華
부위량%전송아%오동춘%감정화
弧焊逆变电源%软开关%零电压零电流%计算机仿真
弧銲逆變電源%軟開關%零電壓零電流%計算機倣真
호한역변전원%연개관%령전압령전류%계산궤방진
全桥零电压零电流脉宽调制变换器在全桥零电压脉宽调制变换器的基础上增加一个可饱和电感和阻断电容,使一次电流在箝位续流时段很快衰减到零并保持,滞后臂的功率器件实现了零电流关断,超前臂的功率器件实现了零电压开通.一方面使得具有关断拖尾电流特性的IGBT应用到了全桥软开关变换器中,另一方面解决了关断损耗,减小了占空比损失.详细分析了全桥零电压零电流脉宽调制变换器的工作原理,在此基础上,通过在MATLAB7.0中建立可变电感的模型代替可饱和电感,对主电路进行了建模和仿真.模型运行后得出与理论分析相吻合的结果,证明了模型的准确性.同时,获得一套满足超前臂零电压开通,滞后臂零电流关断的主电路仿真参数.
全橋零電壓零電流脈寬調製變換器在全橋零電壓脈寬調製變換器的基礎上增加一箇可飽和電感和阻斷電容,使一次電流在箝位續流時段很快衰減到零併保持,滯後臂的功率器件實現瞭零電流關斷,超前臂的功率器件實現瞭零電壓開通.一方麵使得具有關斷拖尾電流特性的IGBT應用到瞭全橋軟開關變換器中,另一方麵解決瞭關斷損耗,減小瞭佔空比損失.詳細分析瞭全橋零電壓零電流脈寬調製變換器的工作原理,在此基礎上,通過在MATLAB7.0中建立可變電感的模型代替可飽和電感,對主電路進行瞭建模和倣真.模型運行後得齣與理論分析相吻閤的結果,證明瞭模型的準確性.同時,穫得一套滿足超前臂零電壓開通,滯後臂零電流關斷的主電路倣真參數.
전교령전압령전류맥관조제변환기재전교령전압맥관조제변환기적기출상증가일개가포화전감화조단전용,사일차전류재겸위속류시단흔쾌쇠감도령병보지,체후비적공솔기건실현료령전류관단,초전비적공솔기건실현료령전압개통.일방면사득구유관단타미전류특성적IGBT응용도료전교연개관변환기중,령일방면해결료관단손모,감소료점공비손실.상세분석료전교령전압령전류맥관조제변환기적공작원리,재차기출상,통과재MATLAB7.0중건립가변전감적모형대체가포화전감,대주전로진행료건모화방진.모형운행후득출여이론분석상문합적결과,증명료모형적준학성.동시,획득일투만족초전비령전압개통,체후비령전류관단적주전로방진삼수.