河北理工学院学报
河北理工學院學報
하북리공학원학보
JOURNAL OF INSTITUTE OF TECHNOLOGY
2005年
3期
73-77
,共5页
镁铝尖晶石%MgO/Al2O3%原料粒度%烧成温度%成型压力
鎂鋁尖晶石%MgO/Al2O3%原料粒度%燒成溫度%成型壓力
미려첨정석%MgO/Al2O3%원료립도%소성온도%성형압력
以轻烧镁砂、工业氧化铝和α-Al2O3为原料,采用一步烧成法合成镁铝尖晶石,结果表明:通过合理的工艺控制,特别是MgO/Al2O3的值,原料粒度,烧成温度和成型压力,可烧结制得尖晶石含量较高的致密镁铝尖晶石,体积密度可达3.30g/cm3以上.
以輕燒鎂砂、工業氧化鋁和α-Al2O3為原料,採用一步燒成法閤成鎂鋁尖晶石,結果錶明:通過閤理的工藝控製,特彆是MgO/Al2O3的值,原料粒度,燒成溫度和成型壓力,可燒結製得尖晶石含量較高的緻密鎂鋁尖晶石,體積密度可達3.30g/cm3以上.
이경소미사、공업양화려화α-Al2O3위원료,채용일보소성법합성미려첨정석,결과표명:통과합리적공예공제,특별시MgO/Al2O3적치,원료립도,소성온도화성형압력,가소결제득첨정석함량교고적치밀미려첨정석,체적밀도가체3.30g/cm3이상.