CAJ | 학술논문

采用爆炸焊接法制备Fe/Al双金属复合管,为表征复合管界面的结合性能进行了压缩、压扁及压剪实验.实验结果表明,复合管结合良好,其界面强度大于纯铝层的抗剪强度,并且能够承受轴向和径向变形.利用扫描电子显微镜观察了原始界面形貌.测试结果表明,结合良好的复合管界面呈波状或直线状.采用液压胀形工艺以Fe/Al双金属复合管制备出复合管正三通,发现良好的界面结合对铁/铝双金属管的塑性成型具有重要作用.
채용폭작한접법제비Fe/Al쌍금속복합관,위표정복합관계면적결합성능진행료압축、압편급압전실험.실험결과표명,복합관결합량호,기계면강도대우순려층적항전강도,병차능구승수축향화경향변형.이용소묘전자현미경관찰료원시계면형모.측시결과표명,결합량호적복합관계면정파상혹직선상.채용액압창형공예이Fe/Al쌍금속복합관제비출복합관정삼통,발현량호적계면결합대철/려쌍금속관적소성성형구유중요작용.
A Fe/Al clad tube was prepared by explosive welding.Then the bonding characteristic of the interface was investigated by compression,flattening and compression-shear test.The test results exhibit that the clad tubes possessing good bonding interface have higher shear strength than that of pure aluminum and can bear both axial and radial deformation.The original interface between aluminum layer and ferrite layer was observed by scanning electron microscopy (SEM).The results show that the clad tubes with good bonding properties possess the interface in wave and straight shape.The Fe/Al clad tube was used to manufacture the T-shape by hydro-bulging.It is found that the good-bonding interface of the Fe/Al clad tube plays a dominant role in the formation of the T-shape.