石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2012年
1期
85-88
,共4页
帅春岗%段永刚%冉林%彭建云%方全堂
帥春崗%段永剛%冉林%彭建雲%方全堂
수춘강%단영강%염림%팽건운%방전당
底水油藏%水平井%ICD%控水%数值模拟
底水油藏%水平井%ICD%控水%數值模擬
저수유장%수평정%ICD%공수%수치모의
ICD控水技术是通过抑制高渗段、增加低渗段流量实现水平井流动剖面均衡开采的新型控水完井工艺.利用数值模拟方法研究了高渗带比例、渗透率极差、控制段长度、控制段流量对ICD在底水油藏中控水增油效果的影响,并确定ICD最佳安装位置、限流量和控制段长度等参数.结果表明,在非均质油藏中,高渗带与水平井长度比例越小、高渗带与低渗带渗透率极差越大,ICD的控水增油效果越明显;ICD的安装位置、长度和限流量对ICD的控水增油效果有重要影响.为了使控水增油效果最大化,应将ICD安装于水平井段的高渗带,ICD控制段长度要等于或略高于高渗带长度,限流后高渗段的限流量需尽量靠近水平井各井段的平均流量.
ICD控水技術是通過抑製高滲段、增加低滲段流量實現水平井流動剖麵均衡開採的新型控水完井工藝.利用數值模擬方法研究瞭高滲帶比例、滲透率極差、控製段長度、控製段流量對ICD在底水油藏中控水增油效果的影響,併確定ICD最佳安裝位置、限流量和控製段長度等參數.結果錶明,在非均質油藏中,高滲帶與水平井長度比例越小、高滲帶與低滲帶滲透率極差越大,ICD的控水增油效果越明顯;ICD的安裝位置、長度和限流量對ICD的控水增油效果有重要影響.為瞭使控水增油效果最大化,應將ICD安裝于水平井段的高滲帶,ICD控製段長度要等于或略高于高滲帶長度,限流後高滲段的限流量需儘量靠近水平井各井段的平均流量.
ICD공수기술시통과억제고삼단、증가저삼단류량실현수평정류동부면균형개채적신형공수완정공예.이용수치모의방법연구료고삼대비례、삼투솔겁차、공제단장도、공제단류량대ICD재저수유장중공수증유효과적영향,병학정ICD최가안장위치、한류량화공제단장도등삼수.결과표명,재비균질유장중,고삼대여수평정장도비례월소、고삼대여저삼대삼투솔겁차월대,ICD적공수증유효과월명현;ICD적안장위치、장도화한류량대ICD적공수증유효과유중요영향.위료사공수증유효과최대화,응장ICD안장우수평정단적고삼대,ICD공제단장도요등우혹략고우고삼대장도,한류후고삼단적한류량수진량고근수평정각정단적평균류량.