金刚石与磨料磨具工程
金剛石與磨料磨具工程
금강석여마료마구공정
DIAMOND & ABRASIVES ENGINNERING
2007年
3期
52-55
,共4页
王双喜%刘雪敬%耿彪%耿林
王雙喜%劉雪敬%耿彪%耿林
왕쌍희%류설경%경표%경림
铝基结合剂%金刚石磨轮%使用寿命
鋁基結閤劑%金剛石磨輪%使用壽命
려기결합제%금강석마륜%사용수명
Fe基、Cu基、Co基金刚石工具已有大量研究,Al基金刚石工具未见报道.本文采用整体烧结法制备了结合剂组成分别为Al-Sn-Ti、Al-Sn-Ti-Ni-Co、Al-Sn-Ti-Ni、Al-Sn-Ni-Co的铝基金刚石磨轮,分析了铝基金刚石磨轮磨削陶瓷后的显微组织,对比了铝基金刚石磨轮、树脂金刚石磨轮、斜齿金刚石磨轮对不同种类陶瓷砖的修整效果.结果表明:采用A1-Sn-Ti-Ni-Co作结合剂在300℃烧结制备的金刚石磨轮,金刚石出刃高,对陶瓷砖修整效果好,适用砖质广;铝基金刚石磨轮与树脂基磨轮生产成本基本相当,但使用寿命比树脂金刚石磨轮提高3倍以上.
Fe基、Cu基、Co基金剛石工具已有大量研究,Al基金剛石工具未見報道.本文採用整體燒結法製備瞭結閤劑組成分彆為Al-Sn-Ti、Al-Sn-Ti-Ni-Co、Al-Sn-Ti-Ni、Al-Sn-Ni-Co的鋁基金剛石磨輪,分析瞭鋁基金剛石磨輪磨削陶瓷後的顯微組織,對比瞭鋁基金剛石磨輪、樹脂金剛石磨輪、斜齒金剛石磨輪對不同種類陶瓷磚的脩整效果.結果錶明:採用A1-Sn-Ti-Ni-Co作結閤劑在300℃燒結製備的金剛石磨輪,金剛石齣刃高,對陶瓷磚脩整效果好,適用磚質廣;鋁基金剛石磨輪與樹脂基磨輪生產成本基本相噹,但使用壽命比樹脂金剛石磨輪提高3倍以上.
Fe기、Cu기、Co기금강석공구이유대량연구,Al기금강석공구미견보도.본문채용정체소결법제비료결합제조성분별위Al-Sn-Ti、Al-Sn-Ti-Ni-Co、Al-Sn-Ti-Ni、Al-Sn-Ni-Co적려기금강석마륜,분석료려기금강석마륜마삭도자후적현미조직,대비료려기금강석마륜、수지금강석마륜、사치금강석마륜대불동충류도자전적수정효과.결과표명:채용A1-Sn-Ti-Ni-Co작결합제재300℃소결제비적금강석마륜,금강석출인고,대도자전수정효과호,괄용전질엄;려기금강석마륜여수지기마륜생산성본기본상당,단사용수명비수지금강석마륜제고3배이상.