工业水处理
工業水處理
공업수처리
INDUSTRIAL WATER TREATMENT
2010年
8期
80-82,85
,共4页
苎蔴废水%清污分流%分隔治理%工程实例
苧蔴廢水%清汙分流%分隔治理%工程實例
저마폐수%청오분류%분격치리%공정실례
苎蔴脱胶废水具有有机物浓度高、色度深、碱性强、水温高、成分复杂等特点.平均CODcr为3 000~4 000 mg/L,BOD5600~700 mg/L,废水B/C<0.3,属于难生化处理废水.采用"清污分流"、"分隔治理",即物化单独处理与生化综合处理相结合的工艺对其进行治理,设计处理水量为6 500 mS/d.工程稳定运行1 a多,出水水质完全达到<污水综合排放标准>(CB 8978-1996)的一级排放标准.
苧蔴脫膠廢水具有有機物濃度高、色度深、堿性彊、水溫高、成分複雜等特點.平均CODcr為3 000~4 000 mg/L,BOD5600~700 mg/L,廢水B/C<0.3,屬于難生化處理廢水.採用"清汙分流"、"分隔治理",即物化單獨處理與生化綜閤處理相結閤的工藝對其進行治理,設計處理水量為6 500 mS/d.工程穩定運行1 a多,齣水水質完全達到<汙水綜閤排放標準>(CB 8978-1996)的一級排放標準.
저마탈효폐수구유유궤물농도고、색도심、감성강、수온고、성분복잡등특점.평균CODcr위3 000~4 000 mg/L,BOD5600~700 mg/L,폐수B/C<0.3,속우난생화처리폐수.채용"청오분류"、"분격치리",즉물화단독처리여생화종합처리상결합적공예대기진행치리,설계처리수량위6 500 mS/d.공정은정운행1 a다,출수수질완전체도<오수종합배방표준>(CB 8978-1996)적일급배방표준.