电镀与涂饰
電鍍與塗飾
전도여도식
ELECTROPLATING & FINISHING
2009年
10期
45-48
,共4页
陈泽成%皮丕辉%文秀芳%郑大峰%程江%杨卓如
陳澤成%皮丕輝%文秀芳%鄭大峰%程江%楊卓如
진택성%피비휘%문수방%정대봉%정강%양탁여
隔热涂料%掺锑氧化锡%纳米粒子%甲基丙烯酸甲酯%原位聚合%乙醇分散液
隔熱塗料%摻銻氧化錫%納米粒子%甲基丙烯痠甲酯%原位聚閤%乙醇分散液
격열도료%참제양화석%납미입자%갑기병희산갑지%원위취합%을순분산액
thermal insulation coating%antimony doped tin oxide%nanoparticle%methyl methacrylate%in-situ polymerization%ethanol dispersion solution
将纳米掺锑二氧化锡(ATO)粒子经过超声分散和偶联剂处理后,以甲基丙烯酸甲酯(MMA)为单体,用原位聚合法制备了纳米ATO/PMMA乙醇分散液.讨论了偶联剂种类、MMA与ATO质量比值,引发剂偶氮二异丁腈(AIBN)用量对纳米ATO/PMMA乙醇分散液分散稳定性的影响.确定了合适的偶联剂为乙烯基三叔丁基过氧硅烷(VTPS),最优工艺参数为m(MMA):m(ATO)=2,w(AIBN)=1.5%.往聚丙烯酸酯树脂加入该纳米ATO/PMMA乙醇分散液所制得的涂料,其涂膜同时具有良好的可见光透过率和近红外光阻隔性能.
將納米摻銻二氧化錫(ATO)粒子經過超聲分散和偶聯劑處理後,以甲基丙烯痠甲酯(MMA)為單體,用原位聚閤法製備瞭納米ATO/PMMA乙醇分散液.討論瞭偶聯劑種類、MMA與ATO質量比值,引髮劑偶氮二異丁腈(AIBN)用量對納米ATO/PMMA乙醇分散液分散穩定性的影響.確定瞭閤適的偶聯劑為乙烯基三叔丁基過氧硅烷(VTPS),最優工藝參數為m(MMA):m(ATO)=2,w(AIBN)=1.5%.往聚丙烯痠酯樹脂加入該納米ATO/PMMA乙醇分散液所製得的塗料,其塗膜同時具有良好的可見光透過率和近紅外光阻隔性能.
장납미참제이양화석(ATO)입자경과초성분산화우련제처리후,이갑기병희산갑지(MMA)위단체,용원위취합법제비료납미ATO/PMMA을순분산액.토론료우련제충류、MMA여ATO질량비치,인발제우담이이정정(AIBN)용량대납미ATO/PMMA을순분산액분산은정성적영향.학정료합괄적우련제위을희기삼숙정기과양규완(VTPS),최우공예삼수위m(MMA):m(ATO)=2,w(AIBN)=1.5%.왕취병희산지수지가입해납미ATO/PMMA을순분산액소제득적도료,기도막동시구유량호적가견광투과솔화근홍외광조격성능.
A nano-ATO/PMMA ethanol dispersion solution was prepared by in-situ polymerization with methyl meth-acrylate (MMA) as monomer and nano-ATO (antimony doped tin oxide) treated with ultrasonic and coupling agent as filler.The effect of categories of coupling agent, mass ratio of MMA to ATO and content of azobisisobutyronitrile (AIBN, an initiator) on stability of nano-ATO/PMMA ethanol dispersion solution were studied. The optimal coupling agent was determined as vinyltris(tert-butylperoxy)silane (VTPS) and process parameters were optimized as follows: m (MMA) / m (ATO) = 2 and w (AIBN) = 1.5%. The film obtained from coating containing polyacrylate resin and nano-ATO/PMMA ethanol dispersion solution has good properties of visible light transmittance and near-infrared light barrier.