临床放射学杂志
臨床放射學雜誌
림상방사학잡지
JOURNAL OF CLINICAL RADIOLOGY
2003年
10期
877-881
,共5页
刘玉林%陈宪%安连峰%陈军%杜东屏%郑之青%蒋春林
劉玉林%陳憲%安連峰%陳軍%杜東屏%鄭之青%蔣春林
류옥림%진헌%안련봉%진군%두동병%정지청%장춘림
多层面螺旋CT CT血管成像 成像参数
多層麵螺鏇CT CT血管成像 成像參數
다층면라선CT CT혈관성상 성상삼수
目的探讨多层面螺旋CT血管成像(MSCTA)中扫描参数和重建方法的影响. 资料与方法 60例共120次MSCT扫描, Marconi Mx8000型4层CT扫描仪,分别将准直层厚5.0mm、2.5mm、1.0mm与Pitch 0.875、1.25、1.75相匹配,各组数据分别以0%、50%、70%重叠重建率,对容积再现(VR)重建血管图像的图像质量和血管分支级数显示评分,不同层厚、重叠重建率和Pitch分组比较,将准直层厚2.5mm、1.0mm组,重叠50%重建68次血管成像行最大密度投影(MIP)重建,与对应VR图像行配对t检验. 结果准直层厚1.0mm组0%和50%重叠重建及准直层厚2.5mm组重叠重建率50%、70%图像得分无显著性差异,但与准直层厚2.5mm组重叠重建率0%及准直层厚5.0mm组图像得分有显著性差异;准直层厚2.5mm时3种Pitch图像得分无显著性差异;准直层厚2.5mm和1.0mm时VR重建和MIP重建的得分无显著性差异. 结论 MSCTA时选择适当的扫描重建参数,可以显示较多血管分支级数,获得较好的图像质量,其优化的条件为:准直层厚2.5mm,Pitch 1.75,50%重叠重建,两种重建方法VR和MIP在显示血管方面无明显差别.
目的探討多層麵螺鏇CT血管成像(MSCTA)中掃描參數和重建方法的影響. 資料與方法 60例共120次MSCT掃描, Marconi Mx8000型4層CT掃描儀,分彆將準直層厚5.0mm、2.5mm、1.0mm與Pitch 0.875、1.25、1.75相匹配,各組數據分彆以0%、50%、70%重疊重建率,對容積再現(VR)重建血管圖像的圖像質量和血管分支級數顯示評分,不同層厚、重疊重建率和Pitch分組比較,將準直層厚2.5mm、1.0mm組,重疊50%重建68次血管成像行最大密度投影(MIP)重建,與對應VR圖像行配對t檢驗. 結果準直層厚1.0mm組0%和50%重疊重建及準直層厚2.5mm組重疊重建率50%、70%圖像得分無顯著性差異,但與準直層厚2.5mm組重疊重建率0%及準直層厚5.0mm組圖像得分有顯著性差異;準直層厚2.5mm時3種Pitch圖像得分無顯著性差異;準直層厚2.5mm和1.0mm時VR重建和MIP重建的得分無顯著性差異. 結論 MSCTA時選擇適噹的掃描重建參數,可以顯示較多血管分支級數,穫得較好的圖像質量,其優化的條件為:準直層厚2.5mm,Pitch 1.75,50%重疊重建,兩種重建方法VR和MIP在顯示血管方麵無明顯差彆.
목적탐토다층면라선CT혈관성상(MSCTA)중소묘삼수화중건방법적영향. 자료여방법 60례공120차MSCT소묘, Marconi Mx8000형4층CT소묘의,분별장준직층후5.0mm、2.5mm、1.0mm여Pitch 0.875、1.25、1.75상필배,각조수거분별이0%、50%、70%중첩중건솔,대용적재현(VR)중건혈관도상적도상질량화혈관분지급수현시평분,불동층후、중첩중건솔화Pitch분조비교,장준직층후2.5mm、1.0mm조,중첩50%중건68차혈관성상행최대밀도투영(MIP)중건,여대응VR도상행배대t검험. 결과준직층후1.0mm조0%화50%중첩중건급준직층후2.5mm조중첩중건솔50%、70%도상득분무현저성차이,단여준직층후2.5mm조중첩중건솔0%급준직층후5.0mm조도상득분유현저성차이;준직층후2.5mm시3충Pitch도상득분무현저성차이;준직층후2.5mm화1.0mm시VR중건화MIP중건적득분무현저성차이. 결론 MSCTA시선택괄당적소묘중건삼수,가이현시교다혈관분지급수,획득교호적도상질량,기우화적조건위:준직층후2.5mm,Pitch 1.75,50%중첩중건,량충중건방법VR화MIP재현시혈관방면무명현차별.