CAJ | 학술논문

对变形镁合金AZ31B、AZ80A,砂铸镁合金AM60B、AZ91D及压铸镁合金AM50A激光焊接气孔倾向进行研究.研究表明:变形镁合金激光焊气孔倾向很小,在较宽的焊接工艺参数范围内均能得到无气孔的焊缝. 砂铸镁合金AM60B及AZ91D激光焊时气孔对气体保护条件非常敏感,在侧吹气体保护角度及流量选择不合适时气孔率非常高,在优化的气保护条件下可得到气孔率较低的焊缝.而压铸镁合金AM50激光焊缝中气孔问题非常突出,调整工艺参数无法解决气孔问题,焊接过程中的加热及添加填充材料可以在一定程度上减少气孔.
대변형미합금AZ31B、AZ80A,사주미합금AM60B、AZ91D급압주미합금AM50A격광한접기공경향진행연구.연구표명:변형미합금격광한기공경향흔소,재교관적한접공예삼수범위내균능득도무기공적한봉. 사주미합금AM60B급AZ91D격광한시기공대기체보호조건비상민감,재측취기체보호각도급류량선택불합괄시기공솔비상고,재우화적기보호조건하가득도기공솔교저적한봉.이압주미합금AM50격광한봉중기공문제비상돌출,조정공예삼수무법해결기공문제,한접과정중적가열급첨가전충재료가이재일정정도상감소기공.
Tendency to pore formation of wrought magnesium alloys AZ31B, AZ80A,sand-cast magnesium alloys AM60B, AZ91D and die-cast magnesium alloys AM50A during laser welding are studied. The results show that wrought magnesium alloys are not prone to porosity and welds pore-free can be obtained in a wide range of welding parameters. Porosity in laser welds of sand-cast magnesium alloys is sensitive to gas shielding conditions and is very high under unsuitable gas shielding angle and flux. Low porosity welds can be obtained under optimized gas shielding conditions. Porosity is severe in die-cast AM50 laser welds and cannot be solved by optimizing welding parameters. Heating the work piece during welding and adding suitable filling materials can reduce porosity to some extent.