工程与试验
工程與試驗
공정여시험
ENGINEERING & TEST
2011年
4期
34-37
,共4页
刘钊%朱喜斌%吉宏林%王鑫
劉釗%硃喜斌%吉宏林%王鑫
류쇠%주희빈%길굉림%왕흠
落锤试验%ASTM E208%NDT%试样
落錘試驗%ASTM E208%NDT%試樣
락추시험%ASTM E208%NDT%시양
落锤试验是核电装备制造中对材料进行检测和评判的一种重要方法.本文分析了试样尺寸、试样焊接、过程控制和结果判定四类影响落锤试验的因素,可在今后的试验过程中进行控制,使测试结果达到稳定准确.
落錘試驗是覈電裝備製造中對材料進行檢測和評判的一種重要方法.本文分析瞭試樣呎吋、試樣銲接、過程控製和結果判定四類影響落錘試驗的因素,可在今後的試驗過程中進行控製,使測試結果達到穩定準確.
락추시험시핵전장비제조중대재료진행검측화평판적일충중요방법.본문분석료시양척촌、시양한접、과정공제화결과판정사류영향락추시험적인소,가재금후적시험과정중진행공제,사측시결과체도은정준학.