同济大学学报(医学版)
同濟大學學報(醫學版)
동제대학학보(의학판)
JOURNAL OF TONGJI UNIVERSITY (MEDICAL SCIENCE)
2008年
5期
71-75
,共5页
徐远志%张富强%徐钦%余锦豪%汪饶饶%尚光伟
徐遠誌%張富彊%徐欽%餘錦豪%汪饒饒%尚光偉
서원지%장부강%서흠%여금호%왕요요%상광위
上颌窦%三维有限元%种植体%应力分析
上頜竇%三維有限元%種植體%應力分析
상합두%삼유유한원%충식체%응력분석
目的 通过建立冲顶器顶端在上颌窦底不同位置进行冲顶的上颌窦区域及冲顶器的三维有限元模型,动态模拟研究行窦底冲顶时窦底提升的安全性和有效性.方法 通过逆向工程建立在上颌窦底部、与上颌窦侧壁成30°角、成60°角及上颌窦纵隔底部等不同位置进行冲顶的上颌窦区域三维有限元模型,施加动态冲击载荷进行窦底提升,研究窦底冲顶时冲顶器、窦底骨质及黏膜的应力和位移情况.结果 应用三维有限元法,通过建立在上颌窦底部、与上颌窦侧壁成30°角、成60°角及上颌窦纵隔底部等不同位置进行冲顶的上颌窦区域模型,动态模拟了行窦底冲顶时冲顶器、窦底骨质及黏膜的应力和位移情况;上颌窦内提升术在纵隔底部进行冲顶时存在上颌窦黏膜撕裂的风险,临床上应慎重开展,在上颌窦侧壁进行提升时,如果接触角过小,应有意识控制防止冲顶器的侧滑造成不利的影响.结论 上颌窦内提升术前应明确提升的部位,防止纵隔底部进行冲顶及与窦侧壁接触角过小冲顶造成的风险.
目的 通過建立遲頂器頂耑在上頜竇底不同位置進行遲頂的上頜竇區域及遲頂器的三維有限元模型,動態模擬研究行竇底遲頂時竇底提升的安全性和有效性.方法 通過逆嚮工程建立在上頜竇底部、與上頜竇側壁成30°角、成60°角及上頜竇縱隔底部等不同位置進行遲頂的上頜竇區域三維有限元模型,施加動態遲擊載荷進行竇底提升,研究竇底遲頂時遲頂器、竇底骨質及黏膜的應力和位移情況.結果 應用三維有限元法,通過建立在上頜竇底部、與上頜竇側壁成30°角、成60°角及上頜竇縱隔底部等不同位置進行遲頂的上頜竇區域模型,動態模擬瞭行竇底遲頂時遲頂器、竇底骨質及黏膜的應力和位移情況;上頜竇內提升術在縱隔底部進行遲頂時存在上頜竇黏膜撕裂的風險,臨床上應慎重開展,在上頜竇側壁進行提升時,如果接觸角過小,應有意識控製防止遲頂器的側滑造成不利的影響.結論 上頜竇內提升術前應明確提升的部位,防止縱隔底部進行遲頂及與竇側壁接觸角過小遲頂造成的風險.
목적 통과건립충정기정단재상합두저불동위치진행충정적상합두구역급충정기적삼유유한원모형,동태모의연구행두저충정시두저제승적안전성화유효성.방법 통과역향공정건립재상합두저부、여상합두측벽성30°각、성60°각급상합두종격저부등불동위치진행충정적상합두구역삼유유한원모형,시가동태충격재하진행두저제승,연구두저충정시충정기、두저골질급점막적응력화위이정황.결과 응용삼유유한원법,통과건립재상합두저부、여상합두측벽성30°각、성60°각급상합두종격저부등불동위치진행충정적상합두구역모형,동태모의료행두저충정시충정기、두저골질급점막적응력화위이정황;상합두내제승술재종격저부진행충정시존재상합두점막시렬적풍험,림상상응신중개전,재상합두측벽진행제승시,여과접촉각과소,응유의식공제방지충정기적측활조성불리적영향.결론 상합두내제승술전응명학제승적부위,방지종격저부진행충정급여두측벽접촉각과소충정조성적풍험.