石油化工设备
石油化工設備
석유화공설비
PETRO-CHEMICAL EQUIPMENT
2006年
5期
56-58
,共3页
复合钢板%焊接性%焊接工艺%焊接接头
複閤鋼闆%銲接性%銲接工藝%銲接接頭
복합강판%한접성%한접공예%한접접두
在16MnR+405复合钢板的焊接中,由于基层对复层焊缝的稀释和碳迁移,可在复层侧焊缝中产生马氏体组织,因此,降低基层焊缝的熔合比和选择焊接材料是堆焊的关键.应采用小电流、快速焊、多道焊.为保证复层焊缝良好的耐腐蚀和抗裂性能,采用25-13型铬镍奥氏体焊条堆焊,复层的组织应为奥氏体和(4%~12%)的δ铁素体.
在16MnR+405複閤鋼闆的銲接中,由于基層對複層銲縫的稀釋和碳遷移,可在複層側銲縫中產生馬氏體組織,因此,降低基層銲縫的鎔閤比和選擇銲接材料是堆銲的關鍵.應採用小電流、快速銲、多道銲.為保證複層銲縫良好的耐腐蝕和抗裂性能,採用25-13型鉻鎳奧氏體銲條堆銲,複層的組織應為奧氏體和(4%~12%)的δ鐵素體.
재16MnR+405복합강판적한접중,유우기층대복층한봉적희석화탄천이,가재복층측한봉중산생마씨체조직,인차,강저기층한봉적용합비화선택한접재료시퇴한적관건.응채용소전류、쾌속한、다도한.위보증복층한봉량호적내부식화항렬성능,채용25-13형락얼오씨체한조퇴한,복층적조직응위오씨체화(4%~12%)적δ철소체.