CAJ | 학술논문

在单因素实验基础上,采用Box-Behnken中心组合设计原理优化提取溶剂甲醇的浓度、超声提取时间、超声功率和液料比.以连翘苷得率为响应值进行多元二次响应回归分析,得到连翘苷的最佳提取工艺条件为:甲醇浓度100%,超声提取时间27min,超声功率416 W,液料比12:1.回归模型预测最优条件下连翘苷得率为0.082%,验证值为0.080%,与预测值的相对误差为2.39%.
재단인소실험기출상,채용Box-Behnken중심조합설계원리우화제취용제갑순적농도、초성제취시간、초성공솔화액료비.이련교감득솔위향응치진행다원이차향응회귀분석,득도련교감적최가제취공예조건위:갑순농도100%,초성제취시간27min,초성공솔416 W,액료비12:1.회귀모형예측최우조건하련교감득솔위0.082%,험증치위0.080%,여예측치적상대오차위2.39%.
Based on the single-factor experiments,four independent variables of ultrasonic assisted extraction for forsythin,which were methanol concentration,extraction time,ultrasonic power and the ratio of solvent to solid,were optimized by response surface analysis methodology(RSM).The experiments were arranged according to fourfactor-three-level Box-Behnken central composite experiment design.Multi-quadratic equation was established with the yield of forsythin as response values.The optimum conditions for forsythin obtained by RSM were as follows:methanol concentration 100%.extraction time 27 min,ultrasonic power 416 W and the ratio of solvent to solid 1 2:1.The predictive maximum extraction yield was 0.082%and the average experimental value was 0.080%.The relative error between them was 2.39%.