应用激光
應用激光
응용격광
APPLIED LASER
2009年
6期
511-514,520
,共5页
周终强%王之桐%杨明江%石茂
週終彊%王之桐%楊明江%石茂
주종강%왕지동%양명강%석무
激光诱导放电%表面强化点%坑径%坑深
激光誘導放電%錶麵彊化點%坑徑%坑深
격광유도방전%표면강화점%갱경%갱심
laser-induced discharge%surface strengthening pit%pit-diameter%pit-depth
采用45~#钢作为工件电极,钨合金作为工具电极,在不同放电电流、放电脉宽条件下,于空气中进行了单脉冲激光诱导放电实验.从表面形貌照片来看,放电点大致为圆形,坑表面较平坦,随着放电脉宽、放电电流的增大,强化点坑径、坑深随之增大.通过对实验数据的拟合,得到了强化点坑径、坑深随放电电流和放电脉宽变化的经验公式.获得的经验公式拟合效果好,相关系数高,可用来指导加工工艺的优化设计.
採用45~#鋼作為工件電極,鎢閤金作為工具電極,在不同放電電流、放電脈寬條件下,于空氣中進行瞭單脈遲激光誘導放電實驗.從錶麵形貌照片來看,放電點大緻為圓形,坑錶麵較平坦,隨著放電脈寬、放電電流的增大,彊化點坑徑、坑深隨之增大.通過對實驗數據的擬閤,得到瞭彊化點坑徑、坑深隨放電電流和放電脈寬變化的經驗公式.穫得的經驗公式擬閤效果好,相關繫數高,可用來指導加工工藝的優化設計.
채용45~#강작위공건전겁,오합금작위공구전겁,재불동방전전류、방전맥관조건하,우공기중진행료단맥충격광유도방전실험.종표면형모조편래간,방전점대치위원형,갱표면교평탄,수착방전맥관、방전전류적증대,강화점갱경、갱심수지증대.통과대실험수거적의합,득도료강화점갱경、갱심수방전전류화방전맥관변화적경험공식.획득적경험공식의합효과호,상관계수고,가용래지도가공공예적우화설계.
The experiments of single pulse laser-induced discharge under different discharge currents and durations in the atmosphere are presented. The 45~# steel and tungsten alloy were used as work piece and tool electrode respectively. The microscope photograph showed that the shape of discharge pit was circular and the surface was flat. The diameter and depth of the pit increased with the increasing of discharge current and duration. The empirical formulas about the diameter and depth varied from discharge current and duration were obtained. The result of fitting and correlation coefficient present well that can be used to optimize the processing.