焊接学报
銲接學報
한접학보
TRANSACTIONS OF THE CHINA WELDING INSTITUTION
2007年
10期
9-12
,共4页
赵丽敏%刘黎明%徐荣正%张兆栋
趙麗敏%劉黎明%徐榮正%張兆棟
조려민%류려명%서영정%장조동
镁合金%铝合金%锌夹层%扩散焊%接头强度
鎂閤金%鋁閤金%鋅夾層%擴散銲%接頭彊度
미합금%려합금%자협층%확산한%접두강도
采用锌夹层在356℃温度下对镁铝异种金属进行扩散焊连接,并对接头的微观组织和力学性能进行分析.结果表明,利用镁与锌原子互扩散形成低熔点共晶液相区,能够实现镁铝材料的可靠连接.镁铝焊接接头界面区由铝锌反应层、未充分扩散锌层、锌镁反应扩散层组成.铝基体侧铝锌反应层是固溶体层,镁基体一侧锌镁反应扩散层主要是过饱和的固溶体基体及弥散析出的中间相,该区的中间相成分为Mg2Zn11及MgZn2.锌夹层的加入可有效阻止镁铝之间的互扩散.锌夹层镁铝扩散焊接头抗剪强度远超过镁铝直接真空扩散焊接头的抗剪强度.断口观察及相分析表明,接头失效发生在锌镁反应扩散层.
採用鋅夾層在356℃溫度下對鎂鋁異種金屬進行擴散銲連接,併對接頭的微觀組織和力學性能進行分析.結果錶明,利用鎂與鋅原子互擴散形成低鎔點共晶液相區,能夠實現鎂鋁材料的可靠連接.鎂鋁銲接接頭界麵區由鋁鋅反應層、未充分擴散鋅層、鋅鎂反應擴散層組成.鋁基體側鋁鋅反應層是固溶體層,鎂基體一側鋅鎂反應擴散層主要是過飽和的固溶體基體及瀰散析齣的中間相,該區的中間相成分為Mg2Zn11及MgZn2.鋅夾層的加入可有效阻止鎂鋁之間的互擴散.鋅夾層鎂鋁擴散銲接頭抗剪彊度遠超過鎂鋁直接真空擴散銲接頭的抗剪彊度.斷口觀察及相分析錶明,接頭失效髮生在鋅鎂反應擴散層.
채용자협층재356℃온도하대미려이충금속진행확산한련접,병대접두적미관조직화역학성능진행분석.결과표명,이용미여자원자호확산형성저용점공정액상구,능구실현미려재료적가고련접.미려한접접두계면구유려자반응층、미충분확산자층、자미반응확산층조성.려기체측려자반응층시고용체층,미기체일측자미반응확산층주요시과포화적고용체기체급미산석출적중간상,해구적중간상성분위Mg2Zn11급MgZn2.자협층적가입가유효조지미려지간적호확산.자협층미려확산한접두항전강도원초과미려직접진공확산한접두적항전강도.단구관찰급상분석표명,접두실효발생재자미반응확산층.