郑州大学学报(医学版)
鄭州大學學報(醫學版)
정주대학학보(의학판)
JOURNAL OF ZHENGZHOU UNIVERSITY(MEDICAL SCIENCES)
2007年
5期
872-874
,共3页
甲基丙烯酸树脂%消毒%机械性能
甲基丙烯痠樹脂%消毒%機械性能
갑기병희산수지%소독%궤계성능
目的:测量3种消毒剂浸泡过的甲基丙烯酸树脂的机械性能,了解消毒剂对树脂基托机械性能的影响,为临床应用提供依据.方法:制备80 mm×15 mm×4 mm丙烯酸树脂试样40个,随机分成A、B、C、D 4组,每组10个,分别浸泡于1:200"84"消毒液、体积分数为0.1%的过氧乙酸、体积分数为2%的戊二醛消毒液和蒸馏水中,30 min后从每组取出5个(共20个)试样为组1,分别测试每组树脂基托的弯曲强度和弯曲模量;取出每组中的另外5个(共20个)为组2,测试其冲击强度.结果:1:200"84"消毒液、体积分数为0.1%的过氧乙酸、体积分数为2%的戊二醛3种消毒液浸泡前后,反映材料机械性能的弯曲强度和弯曲模量及冲击强度3项指标差异均无统计学意义,且与蒸馏水浸泡组差异无统计学意义.结论:甲基丙烯酸树脂在1:200"84"消毒液、体积分数为0.1%的过氧乙酸、体积分数为2%的戊二醛中浸泡30 min,其机械性能均不受影响.
目的:測量3種消毒劑浸泡過的甲基丙烯痠樹脂的機械性能,瞭解消毒劑對樹脂基託機械性能的影響,為臨床應用提供依據.方法:製備80 mm×15 mm×4 mm丙烯痠樹脂試樣40箇,隨機分成A、B、C、D 4組,每組10箇,分彆浸泡于1:200"84"消毒液、體積分數為0.1%的過氧乙痠、體積分數為2%的戊二醛消毒液和蒸餾水中,30 min後從每組取齣5箇(共20箇)試樣為組1,分彆測試每組樹脂基託的彎麯彊度和彎麯模量;取齣每組中的另外5箇(共20箇)為組2,測試其遲擊彊度.結果:1:200"84"消毒液、體積分數為0.1%的過氧乙痠、體積分數為2%的戊二醛3種消毒液浸泡前後,反映材料機械性能的彎麯彊度和彎麯模量及遲擊彊度3項指標差異均無統計學意義,且與蒸餾水浸泡組差異無統計學意義.結論:甲基丙烯痠樹脂在1:200"84"消毒液、體積分數為0.1%的過氧乙痠、體積分數為2%的戊二醛中浸泡30 min,其機械性能均不受影響.
목적:측량3충소독제침포과적갑기병희산수지적궤계성능,료해소독제대수지기탁궤계성능적영향,위림상응용제공의거.방법:제비80 mm×15 mm×4 mm병희산수지시양40개,수궤분성A、B、C、D 4조,매조10개,분별침포우1:200"84"소독액、체적분수위0.1%적과양을산、체적분수위2%적무이철소독액화증류수중,30 min후종매조취출5개(공20개)시양위조1,분별측시매조수지기탁적만곡강도화만곡모량;취출매조중적령외5개(공20개)위조2,측시기충격강도.결과:1:200"84"소독액、체적분수위0.1%적과양을산、체적분수위2%적무이철3충소독액침포전후,반영재료궤계성능적만곡강도화만곡모량급충격강도3항지표차이균무통계학의의,차여증류수침포조차이무통계학의의.결론:갑기병희산수지재1:200"84"소독액、체적분수위0.1%적과양을산、체적분수위2%적무이철중침포30 min,기궤계성능균불수영향.