材料科学与工程学报
材料科學與工程學報
재료과학여공정학보
MATERIALS SCIENCE AND ENGINEERING
2003年
1期
83-86
,共4页
Ti50Ni40Cu10%相变潜热%相变热滞%热处理工艺%相变热循环
Ti50Ni40Cu10%相變潛熱%相變熱滯%熱處理工藝%相變熱循環
Ti50Ni40Cu10%상변잠열%상변열체%열처리공예%상변열순배
本文采用示差扫描量热仪(DSC)系统分析了Ti50Ni40Cu10(at.%)合金的马氏体相变潜热(ΔHB2→B19)和逆马氏体相变潜热(ΔHB19→B2)、相变热滞(ΔT)与固溶温度、退火温度和相变热循环间的关系.结果表明:相变潜热随着固溶化温度的升高而明显降低、随着退火温度的升高则略微降低.相变热滞、逆马氏体相变温度在热循环初期迅速降低,当热循环次数超过2次时则均保持不变;逆马氏体相变潜热(ΔHB19→B2和ΔHB19→B19)随着热循环次数(n<4)的增加有所升高,特别是ΔHB19→B19约增加58%,而热循环次数对马氏体相变温度和潜热ΔHB2→B19则无明显影响.
本文採用示差掃描量熱儀(DSC)繫統分析瞭Ti50Ni40Cu10(at.%)閤金的馬氏體相變潛熱(ΔHB2→B19)和逆馬氏體相變潛熱(ΔHB19→B2)、相變熱滯(ΔT)與固溶溫度、退火溫度和相變熱循環間的關繫.結果錶明:相變潛熱隨著固溶化溫度的升高而明顯降低、隨著退火溫度的升高則略微降低.相變熱滯、逆馬氏體相變溫度在熱循環初期迅速降低,噹熱循環次數超過2次時則均保持不變;逆馬氏體相變潛熱(ΔHB19→B2和ΔHB19→B19)隨著熱循環次數(n<4)的增加有所升高,特彆是ΔHB19→B19約增加58%,而熱循環次數對馬氏體相變溫度和潛熱ΔHB2→B19則無明顯影響.
본문채용시차소묘량열의(DSC)계통분석료Ti50Ni40Cu10(at.%)합금적마씨체상변잠열(ΔHB2→B19)화역마씨체상변잠열(ΔHB19→B2)、상변열체(ΔT)여고용온도、퇴화온도화상변열순배간적관계.결과표명:상변잠열수착고용화온도적승고이명현강저、수착퇴화온도적승고칙략미강저.상변열체、역마씨체상변온도재열순배초기신속강저,당열순배차수초과2차시칙균보지불변;역마씨체상변잠열(ΔHB19→B2화ΔHB19→B19)수착열순배차수(n<4)적증가유소승고,특별시ΔHB19→B19약증가58%,이열순배차수대마씨체상변온도화잠열ΔHB2→B19칙무명현영향.