轻合金加工技术
輕閤金加工技術
경합금가공기술
LIGHT ALLOY FABRICATION TECHNOLOGY
2001年
7期
22-24
,共3页
铝箔坯料%冷轧工艺%退火%粗大晶粒
鋁箔坯料%冷軋工藝%退火%粗大晶粒
려박배료%랭알공예%퇴화%조대정립
试验研究了变形程度、道次加工率、润滑等对铝箔坯料退火产生粗大晶粒的影响.指出:变形程度大于70%对冷轧后铝箔坯料退火产生粗大晶粒的影响不大;采用开始道次压下量大,少道次和润滑充足的冷轧工艺,可以使冷轧后铝箔坯料退火产生粗大晶粒的温度有很大提高.
試驗研究瞭變形程度、道次加工率、潤滑等對鋁箔坯料退火產生粗大晶粒的影響.指齣:變形程度大于70%對冷軋後鋁箔坯料退火產生粗大晶粒的影響不大;採用開始道次壓下量大,少道次和潤滑充足的冷軋工藝,可以使冷軋後鋁箔坯料退火產生粗大晶粒的溫度有很大提高.
시험연구료변형정도、도차가공솔、윤활등대려박배료퇴화산생조대정립적영향.지출:변형정도대우70%대랭알후려박배료퇴화산생조대정립적영향불대;채용개시도차압하량대,소도차화윤활충족적랭알공예,가이사랭알후려박배료퇴화산생조대정립적온도유흔대제고.