计量学报
計量學報
계량학보
ACTA METROLOGICA SINICA
2010年
3期
204-207
,共4页
于英%黄桂平%贾超广%平丽浩%柳玉书
于英%黃桂平%賈超廣%平麗浩%柳玉書
우영%황계평%가초엄%평려호%류옥서
计量学%双目动态摄影测量%相机同步%相机标定%像点提取%像点匹配
計量學%雙目動態攝影測量%相機同步%相機標定%像點提取%像點匹配
계량학%쌍목동태섭영측량%상궤동보%상궤표정%상점제취%상점필배
针对振动条件下雷达天线型面变形测量问题,设计了基于双目视觉动态摄影测量系统.介绍了系统的组成和工作流程,并对其中的相机同步技术、相机控制场标定技术、圆形标志点中心定位技术、像点自动匹配技术进行了研究.系统通过图像采集卡实现了一种廉价的ns级双相机同步方式.用10参数模型对相机进行了标定.采用了一种高反射率的圆形人工标志,通过Canny灰度质心的方法实现了圆形标志点中心的定位.系统用两种方法实现了像点的自动匹配:第一种是基于待测物体近似坐标的驱动点匹配方法.第二种则是运用核线约束、像点残差约束和相对关系约束,完成像点自动匹配.进行了振动测量试验,试验结果表明在物距为1.5 m和物体振动频率小于50 Hz条件下,系统点位测量精度小于0.3 mm,平面度测量精度小于0.1 mm.
針對振動條件下雷達天線型麵變形測量問題,設計瞭基于雙目視覺動態攝影測量繫統.介紹瞭繫統的組成和工作流程,併對其中的相機同步技術、相機控製場標定技術、圓形標誌點中心定位技術、像點自動匹配技術進行瞭研究.繫統通過圖像採集卡實現瞭一種廉價的ns級雙相機同步方式.用10參數模型對相機進行瞭標定.採用瞭一種高反射率的圓形人工標誌,通過Canny灰度質心的方法實現瞭圓形標誌點中心的定位.繫統用兩種方法實現瞭像點的自動匹配:第一種是基于待測物體近似坐標的驅動點匹配方法.第二種則是運用覈線約束、像點殘差約束和相對關繫約束,完成像點自動匹配.進行瞭振動測量試驗,試驗結果錶明在物距為1.5 m和物體振動頻率小于50 Hz條件下,繫統點位測量精度小于0.3 mm,平麵度測量精度小于0.1 mm.
침대진동조건하뢰체천선형면변형측량문제,설계료기우쌍목시각동태섭영측량계통.개소료계통적조성화공작류정,병대기중적상궤동보기술、상궤공제장표정기술、원형표지점중심정위기술、상점자동필배기술진행료연구.계통통과도상채집잡실현료일충렴개적ns급쌍상궤동보방식.용10삼수모형대상궤진행료표정.채용료일충고반사솔적원형인공표지,통과Canny회도질심적방법실현료원형표지점중심적정위.계통용량충방법실현료상점적자동필배:제일충시기우대측물체근사좌표적구동점필배방법.제이충칙시운용핵선약속、상점잔차약속화상대관계약속,완성상점자동필배.진행료진동측량시험,시험결과표명재물거위1.5 m화물체진동빈솔소우50 Hz조건하,계통점위측량정도소우0.3 mm,평면도측량정도소우0.1 mm.