热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2011年
20期
181-182,185
,共3页
何春艳%叶红川%曲恒磊%邓超
何春豔%葉紅川%麯恆磊%鄧超
하춘염%협홍천%곡항뢰%산초
TB3钛合金%热处理%显微组织%力学性能
TB3鈦閤金%熱處理%顯微組織%力學性能
TB3태합금%열처리%현미조직%역학성능
研究了热处理制度对TB3钛合金组织及力学性能的影响.结果发现,TB3钛合金经800~820℃固溶后,室温拉伸时合金具有较高的强度和优异的塑性,且随固溶温度的升高,强度降低,塑性增加;固溶并时效后合金具有很高的强度及较好的塑性,且随时效温度的升高,合金强度显著降低、塑性增加.
研究瞭熱處理製度對TB3鈦閤金組織及力學性能的影響.結果髮現,TB3鈦閤金經800~820℃固溶後,室溫拉伸時閤金具有較高的彊度和優異的塑性,且隨固溶溫度的升高,彊度降低,塑性增加;固溶併時效後閤金具有很高的彊度及較好的塑性,且隨時效溫度的升高,閤金彊度顯著降低、塑性增加.
연구료열처리제도대TB3태합금조직급역학성능적영향.결과발현,TB3태합금경800~820℃고용후,실온랍신시합금구유교고적강도화우이적소성,차수고용온도적승고,강도강저,소성증가;고용병시효후합금구유흔고적강도급교호적소성,차수시효온도적승고,합금강도현저강저、소성증가.