武汉科技大学学报(自然科学版)
武漢科技大學學報(自然科學版)
무한과기대학학보(자연과학판)
JOURNAL OF WUHAN UNIVERSITY OF SCIENCE AND TECHNOLOGY(NATURAL SCIENCE EDITION)
2011年
1期
13-17
,共5页
杨胜林%赵三星%王凤才%颜家森%张震
楊勝林%趙三星%王鳳纔%顏傢森%張震
양성림%조삼성%왕봉재%안가삼%장진
宽展%冷轧%显式动力学%轧制力%摩擦系数%压下率
寬展%冷軋%顯式動力學%軋製力%摩抆繫數%壓下率
관전%랭알%현식동역학%알제력%마찰계수%압하솔
基于金属流动原理,采用显式动力学有限元软件ANSYS/LS-DYNA模拟薄板轧制过程,研究轧制力、摩擦系数、压下率对轧件宽展变化的影响.结果表明,摩擦系数越大,轧件宽展也越大;轧件的最大宽展随着轧制力的增加而增大,轧制力对轧件后端部分宽展影响程度较大;压下率增大,轧件宽展随之增大,轧件各部分宽展的不均匀程度也在增加.
基于金屬流動原理,採用顯式動力學有限元軟件ANSYS/LS-DYNA模擬薄闆軋製過程,研究軋製力、摩抆繫數、壓下率對軋件寬展變化的影響.結果錶明,摩抆繫數越大,軋件寬展也越大;軋件的最大寬展隨著軋製力的增加而增大,軋製力對軋件後耑部分寬展影響程度較大;壓下率增大,軋件寬展隨之增大,軋件各部分寬展的不均勻程度也在增加.
기우금속류동원리,채용현식동역학유한원연건ANSYS/LS-DYNA모의박판알제과정,연구알제력、마찰계수、압하솔대알건관전변화적영향.결과표명,마찰계수월대,알건관전야월대;알건적최대관전수착알제력적증가이증대,알제력대알건후단부분관전영향정도교대;압하솔증대,알건관전수지증대,알건각부분관전적불균균정도야재증가.