机械设计与研究
機械設計與研究
궤계설계여연구
MACHINE DESIGN AND RESEARCH
2012年
3期
90-93
,共4页
刘放%樊宝康%刘炳乾%罗勇
劉放%樊寶康%劉炳乾%囉勇
류방%번보강%류병건%라용
疏浚%离析器%设计%试验
疏浚%離析器%設計%試驗
소준%리석기%설계%시험
以小河道清淤为主要目的,应用SolidWorks软件平台设计了疏浚离析器,采用流体机械试验方法验证了离析器的功效.室内试验研究了三种不同孔径的喷嘴在离析器1/4小开度阀位工况下的管道出口含沙量与密度,现场清淤试验在河道中检验了疏浚器的泥浆输送特性与机械特性,研究分析了235 m长距离或45 m短距离泥浆输送情况下的扬程高度与排淤量的运行参数,发现理想的喷嘴孔径为9.0mm,在6 m扬程时短距离泥浆输送末端流量为105.81 m3/h.结果表明基于伯努利效应的离析器具有体积小、出流量大、泥浆浓度高等优点,能较好适应河道宽度、水深、土质等要素变化.
以小河道清淤為主要目的,應用SolidWorks軟件平檯設計瞭疏浚離析器,採用流體機械試驗方法驗證瞭離析器的功效.室內試驗研究瞭三種不同孔徑的噴嘴在離析器1/4小開度閥位工況下的管道齣口含沙量與密度,現場清淤試驗在河道中檢驗瞭疏浚器的泥漿輸送特性與機械特性,研究分析瞭235 m長距離或45 m短距離泥漿輸送情況下的颺程高度與排淤量的運行參數,髮現理想的噴嘴孔徑為9.0mm,在6 m颺程時短距離泥漿輸送末耑流量為105.81 m3/h.結果錶明基于伯努利效應的離析器具有體積小、齣流量大、泥漿濃度高等優點,能較好適應河道寬度、水深、土質等要素變化.
이소하도청어위주요목적,응용SolidWorks연건평태설계료소준리석기,채용류체궤계시험방법험증료리석기적공효.실내시험연구료삼충불동공경적분취재리석기1/4소개도벌위공황하적관도출구함사량여밀도,현장청어시험재하도중검험료소준기적니장수송특성여궤계특성,연구분석료235 m장거리혹45 m단거리니장수송정황하적양정고도여배어량적운행삼수,발현이상적분취공경위9.0mm,재6 m양정시단거리니장수송말단류량위105.81 m3/h.결과표명기우백노리효응적리석기구유체적소、출류량대、니장농도고등우점,능교호괄응하도관도、수심、토질등요소변화.