CAJ | 학술논문

设计了一种能形成聚能杆式弹丸的聚能装药结构,并使用该聚能装置进行了侵彻水夹层复合靶试验.结果表明,产生的聚能杆式弹丸在有效贯穿11 mm厚的前置铝靶、3 mm钢靶以及其后的650 mm水夹层后,还贯穿多层后效钢靶,并在后效钢靶上形成了较大口径的侵孔.另外,炸高对聚能装药侵彻水夹层复合靶效果有较大影响,合适的炸高有利于提高对水夹层复合靶的破坏效果.
설계료일충능형성취능간식탄환적취능장약결구,병사용해취능장치진행료침철수협층복합파시험.결과표명,산생적취능간식탄환재유효관천11 mm후적전치려파、3 mm강파이급기후적650 mm수협층후,환관천다층후효강파,병재후효강파상형성료교대구경적침공.령외,작고대취능장약침철수협층복합파효과유교대영향,합괄적작고유리우제고대수협층복합파적파배효과.
A new-type shaped charge which can produce a rod shaped projectile(SCRSP) was devised for shaped charge torpedo. The experiment results of penetrating the compound target with water interlayer indicated that the rod shaped projectile forged from the new-type shaped charges could not only perforated the front-effect target consisting of 11 mm thick aluminum plate and 3 mm thick steel plate and broke through 650 mm thickness of water interlayer, but also penetrated multi-layer interval after-effect steel plates and formed the larger size holes on them. The standoff of the SCRSP had an important effect on its penetration ability. The suitable standoff could improve the damage effect of penetrating the compound target with water interlayer.